Galaxy Audio’s PA6BT Powered Hot Spot continues to be the industry standard in compact near-field live stage vocal monitoring. By minimizing the audio footprint and positioning the monitor in closer proximity to the performer, stage clutter and noise is drastically reduced for a more professional appearance and performance. The lightweight portability of Galaxy Audio compact monitors makes them ideal for gigging musicians and smaller stage venues.
The Powered HOT SPOT® PA6BT personal monitor focuses on live vocal reproduction. The need for a near-field vocal monitor became apparent as stage volumes became increasingly more difficult to control. The Powered HOT SPOT® PA6BT offers the perfect solution for many live stage and portable PA applications. The PA6BT can be mounted on a microphone stand, positioning the monitor in closer proximity to the user and reducing feedback on stage. The mic stand socket and included mic stand adapter on the PA6BT is designed for use with most mic stands. The integrated handle, mic boom mount, and built-in bracket mount points, combined with the optional MBA (mic boom adaptor), allows a gooseneck or microphone boom to be mounted on top of the unit for a clean monitor set-up.
Many performers purchase cumbersome 12" or 15" floor monitors, roll off the low end and crank up the volume in order to cut through the mix. The Full Range PA6BT’s front facing EQ allows the performer to boost the mid-range, and minimal distance to the performer reduces stage volume and feedback. Galaxy Audio Compact Monitors feature a small, lightweight design, making it easier to transport and is the perfect choice for audio clarity and articulation in hostile stage environments.
Galaxy Audio PA6BT Features
- Built-in Bluetooth® with performer facing volume control
- 170 watt built-in amplifier
- 2-way speaker system (6.5" neodymium high power woofer, 1.5" high efficiency tweeter)
- Indicators for power LED, clip LED, and compressor LED
- Protection for short circuit limiting, short circuit foldback limiting, thermal short circuit protection
- 2 channels with performer facing volume controls: CH.1 XLR / 1/4", CH.2 XLR / 1/4" & 1/8"
- -20dB pad switches on each XLR input
- 3 band EQ performer facing controls
- Built-in compressor/limiter
- Pass through on each XLR input
- Integrated handle
- Made of fire retardant styrene
- Built-in yoke bracket points, built-in mic stand insert both for mounting and rigging
- Mounts to most mic stands
- PA6BT 6" powered personal monitor1
- MSA-1 stand adaptor1
- IEC power cable1
- Frequency response80Hz - 18kHz
- Output/peak170 watts @ 4 Ohms
- Sensitivity98dB, 1W @ 1m (1kHz octave band)
- Max SPL118dB
- Speaker compliment
- 1 SW6.5, 6.5" NEOLITE Neodymium Woofer
- 1 ST1.5 ferro fluid cooled 1.5" NEOLITE Neodymium Titanium Dome Tweeter
- Nominal impedance4 Ohms
- Equalization three band center detent
- Lo: ± 12dB @ 200Hz
- Mid: ± 12dB @ 2kHz
- Hi: ± 12dB @ 10kHz
- Input connections
- 2x 1/4" balanced/unbalanced
- 2x XLR+28V phantom power
- 1x 1/8" stereo line in
- Output connections
- 2x XLR thru outputs
- 1x 1/4" preamp output
- Controls
- CH1 and CH2 level
- High frequency
- Mid frequency
- Low frequency
- CH1 and CH2 20dB pad
- Bluetooth button
- Bluetooth volume control
- Power switch
- Power requirements120Vac~60Hz (domestic), 230Vac~50Hz (export)
- Splowt18.44
- Weight6.4 pounds (2.9 kg)
- Dimensions (HxWxD)7.75" x 11.75" x 6.75"
