With the DECT protocol technology, SYSCOM 1000T is widely used in the areas of studio, stage events, EFT, webcasting, filmmaking, etc. The transmission range of SYSCOM 1000T reaches up to 1000ft in a clean line of sight (LOS) with full-duplex wireless communication and carrier—grade voice quality.
Hollyland Syscom 1000T System Features
- 1000ft communication range, carrier-grade voice quality
- 1.9GHz frequency bandwidth
- Full-duplex wireless communication
- Up to 8 beltpacks communication simultaneously (base station)
- Supports gooseneck mic, speaker call, 3.5mm headset, and 4-pin analog audio connection (base station) Supports external connection with other intercom systems
- Base station and beltpacks support PC software upgrade
- Supports wireless TALLY
- Built-in lithium batteries, with longer than 8 hrs run time on full charge (beltpacks)
- Includes industrial metal case
- Base station1
- Beltpack8
- Professional dynamic LEMO single-ear headset9
- 1.9G high-gain base station antennae6
- USB Type-C Cable8
- AC Power Cable1
- 3-Pin XLR gooseneck mic1
- User Manual1
- Multi-Port USB Charger1
- Note: Number of components may vary according to configuration
- Base Station
- Interfaces
- 4 antenna interfaces
- AC type power base AC input
- 4-Pin XLR male DC input
- 3.5mm headset interface
- 8-pin LEMO female headset interface
- 3-Pin XLR female goose mic interface
- 3-Pin XLR female audio in
- 3-pin XLR male audio out
- DB25 female TALLY input interface
- USB Type-A interface
- USB Type-C interface
- Power Supply Mode: 10~20V DC input; 100V~240V AC input
- Frequency Response: 300Hz-4KHz
- Signal to Noise Ratio: >50dB
- Distortion: <2
- Transmission Range: 300m between beltpack and base station
- Frequency Bandwidth: 1.9GHz
- Modulation Mode: GFSK
- Transmission Power: Max 24dBm
- Receiver Sensitivity: ≤93dBm
- Bandwidth:1.728MHz
- Power Consumption: <6W
- Dimensions (LxWxH): 483x175x45mm
- Net Weight: around 2900g
- Temperature Range
- Working Status: 0~+40°C
- Storage Condition: -20~+60°C
- Interfaces
- Beltpack
- Interfaces
- 2 antenna interfaces
- 3.5mm headset interface
- 8-pin LEMO female headset
- 3.5mm TALLY out interface
- USB Type-C interface
- Power Supply Mode: 4000mAh polymer lithium battery
- Frequency Response: 300Hz-4KHz
- Signal to Noise Ratio: >50dB
- Distortion: <2
- Transmission Range: 300m between beltpack and base station
- Frequency Bandwidth: 1.9GHz
- Modulation Mode: GFSK
- Transmission Power: Max 24dBm
- Receiver Sensitivity: ≤93dBm
- Bandwidth:1.728MHz
- Power Consumption: <2W
- Dimensions (LxWxH): 120x71x25mm
- Net Weight: around 300g
- Temperature Range
- Working Status: 0~+40°C
- Storage Condition: -20~+60°C
- Interfaces
