Your Cart
Close
JBL
SoundPro Item:
14211
MPN:
C60PS/T

JBL Control 60PS/T Pendant Subwoofer with Crossover

MSRP: $515.32
$410.00
Save $105.32
Sales & Expert Advice
Have Questions? Talk to a SoundPro Expert!

Need System Design Support?

The Control 60PS/T pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high dutycycle, working conditions.

JBL Control 60PS/T Features

  • Priced individually, sold in quantities of 2
  • High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers
  • 200 mm (8 in) long-excursion driver
  • 8 ohm (150 Watt) and 70V/100V (100 Watt) operation
  • Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp
  • UL listed (speaker and hanging cable system)
  • Control 60PS/T Pendant Subwoofer with Crossover2
  • Suspension cable systems (see “suspension”, above)2
  • sRemovable locking 2-pin euro-block connectors6
  • Rubber cover boots for euroblock connectors6
  • Frequency Range (-10dB) 42 Hz – 350 Hz
  • Frequency Response (±3 dB) 55 Hz – 125 Hz
  • Power Rating 300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs
  • Nominal Sensitivity (2.83V/1m) 88 dB
  • Maximum SPL (1m) 107 dB @ 1 m (3.3 ft) average, 113 dB peak
  • Impedance 8 ohms
  • Transformer Taps 110W, 55W, 30W (& 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8
  • Transformer Insertion Loss 0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W
  • Standalone Hookup Connect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers.
  • Subwoofer-Satellite Hookup For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs highpassed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16
  • Drivers 200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former.
  • Enclosure Material High impact polystyrene
  • Grille Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting)
  • Environmental Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splash-proof rating
  • Input Connectors Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included.
  • Suspension Two identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb).
  • Safety Agency Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
  • Dimensions (H x W x D) 333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket.
  • Net Weight (each) 7.6 kg (16.7 lb)
  • Shipping Weight 17.6 kg (38.7 lbs) per pair-packed carton
  • Colors Available in black or white (-WH). Paintable.

What’s in the Box?

same day shipping

SAME DAY SHIPPINGon in stock items

advice

EXPERT ADVICEfrom knowledgeable Account Managers

easy payments

EASY PAYMENTSwith financing available from Affirm

free shipping

FREE SHIPPINGon orders over $100

gear you need

GEAR YOU NEEDfrom 400+ Brands

Reviews

Your Recently Viewed

Get A Quote

Close

We are here to help with system design support, technical insights, and custom pricing. Send us a message, we'll respond within four business hours!

Why Choose SoundPro?

Since 1973, SoundPro has been a trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

learn more
Certified Account Managers

Certified Account Managers

Our Account Managers, with 16+ industry certifications, are ready to find your solution.

Personalized Pricing

Personalized Pricing

We know every project is unique. Get a personalized quote anytime you need it.

Fast Shipping

Fast Shipping

In stock items ship same day if ordered by 4PM CST.

Accountability from Real People

Accountability from Real People

We aim for a smooth, transparent experience by setting and sticking to clear expectations.

Easy Payments

Easy Payments

We accept all major credit cards, PayPal credit and also offer financing through Affirm.

Sales & Expert Advice

Sales & Expert Advice

Our team of Certified Account Managers are deeply passionate about this industry and have hands-on experience with AVL solutions for houses of worship, live productions, integration and more.

Customer Service Hours: 9am - 5pm CST