When you need a highly mobile and comfortable sound solution, the BPHS1 headset delivers astounding sound quality. Natural, highly intelligible, and focused vocal reproduction work with the headset’s cardioid polar pattern to provide a superior solution for speaking use. Comfort in the headset in combination with audio quality provides a headset worth wearing all day long. Created with on-air news, sports broadcasting, announcing and interviews in mind, this headset also works well in podcasting, live streaming and even audio book narration.
Featuring a cardioid pattern, the high-output dynamic microphone in this headset rejects ambient noise from the sides and rear, focusing in on your voice in demanding sound environments. Pickup excels throughout a wide range of frequencies so audio quality remains steady from heavy lows to airy highs. Neodymium magnets are in the microphone and headphones, delivering high output level and detailed sound reproduction. In the headphones themselves, closed-back design traps pressure inside the headphones to prevent sound from leaking out. Between the closed-back design and circumaural (around-the-ear) ear cups, the sound you want to hear stays in while background noise is sealed out.
Comfortability is an important element of a successful headset. Lightweight headband is cushioned for comfort in long uses. Earpads naturally rest around the ears and can be replaced if they wear down after excessive use. Flexible gooseneck boom with the mic can be adjusted for optimum placement and worn on either the left or right side.
Audio-Technica BPHS1 Features
- Polar pattern and frequency response tailored for natural, highly intelligible vocal reproduction
- Closed-back circumaural ear cups help seal out crowd noise and other background distractions
- Neodymium magnets in microphone and headphones for high output level & detailed sound reproduction
- Cardioid pickup pattern
- Boom-mounted microphone can be positioned on the left or right side
- Adjustable cushioned headband
- User-replaceable cable and ear pads
- Includes detachable cable (BPCB1) that terminates in 3-pin XLRM-type connector for microphone and 1/4" 3-conductor for headphone
- BPHS1 Broadcast Stereo Headset1
- 3 windscreens3
- Spare connector screw1
- Type
- Closed-back Dynamic (Headphone)
- Cardioid Dynamic (Microphone)
- Driver Diameter40 mm (Headphone)
- Frequency Response
- 20-20,000 Hz (Headphone)
- 40-20,000 Hz (Microphone)
- Maximum Input Power1,600 mW at 1 kHz
- Sensitivity
- 100 dB (Headphone)
- -57 dB (1.4 mV) re 1V at 1 Pa (Microphone)
- Impedance
- 65 ohms (Headphone)
- 560 ohms (Microphone)
- Weight264 g (9.3 oz)
- Cable3.3 m (10.8') long with 8-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug (headphone) outputs
- MagnetNeodymium (Headphone)
- Voice CoilCopper-clad aluminum wire
