The Control 67HC/T is a high output, full range, two-way pendant-type loudspeaker that provides superb sound reproduction and very consistent, narrow coverage for rooms with open architecture ceilings and other locations where a pendant form factor is desired. The well-controlled narrow coverage is ideal for improved voice intelligibility and musical clarity in high-ceiling venues or in rooms with difficult acoustics such as convention centers, transit centers, exhibit venues and hotel atrium areas.
JBL Control 67HC/T Features
- Priced individually, sold in quantities of 2
- JBL's exclusive conical Radiation Boundary Integrator® (RBI) technology provides 75° coverage, for clarity in high-ceiling and reverberant locations
- Coaxial design featuring 165 mm (6 ½ in) woofer and 25 mm (1 in) soft-dome tweeter
- Extremely smooth frequency response and superb high fidelity sound reproduction
- Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp
- UL listed (speaker and hanging cable system)
- 8 ohm and 70V/100V operation
- Control 67HC/T High Ceiling Pendant Speaker1
- Suspension cable systems 2
- 2-pin removable locking euro-block connectors2
- Rubber covers for euro-block connectors2
- Frequency Range (-10dB) 75 Hz – 17 kHz
- Frequency Range (±3 dB) 110 Hz – 16 kHz
- Power Rating 75 Watts Continuous Pink Noise Power (with 300 Watts peaks)150 Watts Continuous Program Power
- Nominal Sensitivity 93 dB
- Coverage Angle 75° (+15°/-20°)
- Directivity Factor (Q) 10.4
- Directivity Index (DI) 9.8 dB
- Maximum SPL (1m) 112 dB continuous pink noise, 118 dB peak
- Impedance 8 ohms
- Transformer Taps 70V: 60W, 30W, 15W & 7.5W100V: 60W, 30W, 15W
- Transformer Insertion Loss 0.5 dB @ 7.5 W, 0.5 dB @ 15 W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
- Drivers
- LF: 165 mm (6.5 in) polypropylene-coated paper with pure butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil-former
- HF: 25 mm (1.0 in) textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
- Enclosure High impact polystyrene
- Grille Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
- Outdoor Capability Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.
- Input Connectors Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
- Suspension Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
- Safety Agency Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
- Dimensions (H x W x D) 333 mm (13.1 in) diameter x 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket.
- Net Weight (each) 5.9 kg (13 lbs)
- Shipping Weight (pair)14.1 kg (31 lbs)
- Colors Available in black or white (-WH). Paintable.