JBL VTX A12 Dual 12-Inch Line Array Speaker

JBL VTX A12 is a complete tour sound solution for mid- to large-size touring applications and high-end fixed installations. VTX A12 was designed from scratch to address the unique challenges of rental companies, FOH engineers and tour sound production crews. Next-generation JBL transducer technology and a high-frequency waveguide design deliver unmatched performance, sensitivity and coverage. A patented JBL rigging mechanism and redesigned suspension system streamline deployment and setup. And refinements to the physical design maximize reliability and versatility, while minimizing size and dramatically reducing weight. VTX A12 isn’t just a superior line array—it’s a completely new way to approach tour sound.

The VTX A12’s high frequency (HF) section features three uniquely designed drivers that combine the HF phasing plug and waveguide into one part providing better tolerances and increased sensitivity above 10 kHz, while reducing distortion and overall weight. The patented Radiation Boundary Integrator incorporates four 5.5" mid frequency drivers into the high frequency waveguide while providing a smooth surface for the high frequency horn. A lightweight 12" low frequency woofer (LF) features a fourth-generation Differential Drive design that adds dual magnets to its dual voice coil/dual gap construction, and a host of proprietary JBL technologies for increased excursion, power handling, and sensitivity.

VTX A12 marks a giant leap forward in how loudspeakers are rigged and transported. Four array elements are stacked on the vertical transporter cart for fast deployment. The rigging features an auto-locking mechanism, which allows the selection of angles while components are on the ground; once the system is suspended, the mechanism automatically locks cabinet angles in the designated positions. Set angles simply by pulling and placing a pin—it’s that easy.

JBL VTX A12 Features

• New and improved JBL transducers for the best output per weight
• Innovative HF section integrates the phasing plug and waveguide for high sensitivity and linearity even at high output levels
• Radiation Boundary Integrator® (RBI) for reduced horn edge diffraction, improved LF sensitivity, lower distortion, and 90-degree coverage down to 250 Hz
• Next Generation LF section, including industry-defining Differential Drive woofers, with a dual magnet, dual voice-coil design for extended linear excursion
• Best-in-class rigging for streamlined, rapid deployment
• Full-face grill for superior weatherization and refined aesthetics
• New transport cart and frame for simplified transport and setup
• Optimizations throughout the design for space efficiency and reduced weight while simultaneously improving performance
• Full integration with JBL system control and prediction software
• Lightweight design

• VTX A12 dual 12" compact line array speaker1

• Frequency Range (-10dB)46Hz - 19kHz
• Coverage Pattern (-6dB)
  • Horizontal: 90° nominal (250Hz - 18kHz)
  • Vertical: varies with array size and configuration
• System Input Power Rating
  • LF: 2x 800W continuous (IEC/100 hour)
  • MF: 400W continuous (IEC/100 hour)
  • HF: 150W continuous (IEC/100 hour)
• Max. Peak Output146dB
• System Amplification
  • Crown I-Tech 9000HD
  • Crown I-Tech 12000HD
  • Crown I-Tech 4x3500HD
• Required Amplifier Channels(4) channels (LF|LF|MF|HF)
• Number of Cabinets per Circuit(3) VTX A12
• System Impedance
  • LF: 2x 8Ω
  • MF: 8Ω
  • HF: 8Ω
• Transducers
  • Low Frequency (LF): (2) JBL 2264H, 12" diameter, dual 3" diameter voice coil, Neodymium Differential Drive®
  • Mid Frequency (MF): (4) JBL 2165H, 5.5" diameter, dual 2" diameter voice coil, Neodymium Differential Drive®
  • High Frequency (HF): (3) JBL 2423K, 2" diameter annular diaphragm, 2" diameter voice coil, Neodymium compression drivers
• Connectors
  • Type: (2) Neutrik® speakON® NL-8
  • Pin Assignments
  • Pins 1 ± (LF)
  • Pins 2 ± (LF)
  • Pins 3 ± (MF)
  • Pins 4 ± (HF)
• Enclosure
  • IP Rating: IP55 EN (60529)
  • Suspension: high-grade steel with anti-corrosion coating, captive suspension plates, quick release pins, auto-locking mechanism for setting angles
  • Inter-Enclosure Angle (degree): 0.25, 0.5, 1, 1.5, 2, 2.5, 3, 4, 6, 8, 10
  • Construction: 15 mm 11-ply Finnish birch plywood, Black DuraFlexTM finish, four integral recessed handles
• Dimensions (HxWxD)13" x 44" x 19.5"
• Weight134 pounds