Mackie C200 10-Inch Passive Speaker

The C200 is a full-range portable loudspeaker providing high-output, ultra-wide dispersion and low-distortion performance in a compact, composite molded enclosure.

The C200 delivers clear, smooth sound to audience members up to 45 degrees off axis thanks to a heat-treated titanium compression driver that directs pristine highs through an exponential high-frequency waveguide, allowing for ultra-wide dispersion of highs and mids. The custom-designed high-power 10-inch woofer with a 2-inch voice coil allows the driver to run cooler, delivering consistent performance even after long hours of use at near peak volumes. The crossover in the C200 is a unique Low Impedance Compensated Crossover (LICC) design with an asymmetrical slope. With EQ and crossover points meticulously chosen so that beamwidth patterns match in both drivers, C200 loudspeakers offer natural sound at all volume levels.

The center of gravity, handle locations, handle design, position of fly-points and ease of use have been ergonomically designed. There is also an integrated pole mount on the bottom of the cabinet and a weather-resistant steel grille. The asymmetrical trapezoidal cabinet has been designed to provide an ideal floor monitoring position. The cabinet is constructed of high-pressure injected polyproplyene. The enclosure features reinforcement ribbing and structural strengthening resulting in a strong, super-rigid design providing ideal acoustical characteristics.

C Series Passive Loudspeakers

The same team that designs systems for some of the biggest touring bands in the world poured their expertise into the driver and crossover design for the C-Series. This means drivers that can really take a beating and unmatched clarity across the entire frequency range of the speaker. Featuring legendary Mackie sound quality and durability, the lightweight C Series 2-way Precision Passive loudspeakers deliver optimum performance in portable PA, stage monitor and permanent installation applications.

Enclosures have custom designed high-output drivers and are asymmetrical, causing mid and high frequency resonance's to be reflected at angles into internal damping materials, instead of interfering with the woofer doing its thing. The C-Series loudspeakers have incredibly smooth, spike-free response and dispersion over a wide range of treble frequencies. So you can increase their volume without boosting those nasty, feedback-inducing spikes. Wide, controlled dispersion pattern and precise reproduction of the critical upper mid-range and high frequencies. The result is an unbelievably smooth off-axis response that allows everyone in the audience to experience the same high-resolution audio no matter where they are seated.

C-Series loudspeakers are an excellent choice just about anywhere you can place them. Build the dream PA for your band with a pair of C-Series speakers and a PPM Series Powered Mixer or integrate them into an existing system. Add on a few more and an FRS Series amplifier for an impressive floor monitor setup. Since they are fully flyable, the C-Series is perfect for install systems like a small sanctuary, youth room, bars and small clubs.

C-Series loudspeakers' injection-molded composite chassis and premium components are built for the rigors of the road and years of abuse. And they shrug off impacts that would turn those cheap-o, fuzz covered wood box speakers into toothpicks.

Mackie C200 Features

• 2-way portable Precision Passive loudspeaker system
• 500W peak / 200W RMS power handling at 8 Ω
• 10" long-throw low-frequency transducer with 2" voice coil
• High-output 1.4" titanium compression driver
• Ultra-wide, smooth dispersion via HF horn design
• Integrated Low Impedance Compensated Crossover (LICC) with full driver protection
• Lightweight for ultimate portability (26 lb / 11.8 kg)
• Asymmetrical trapezoidal cabinet for floor monitor positioning
• Stand / Pole-mountable
• Flyable via optional hanging bracket kit

• C200 10" 2-way compact passive speaker1

• Frequency Response (-3 dB)89Hz - 20,000Hz
• Frequency Range (-10 dB)59Hz - 22,000Hz
• Max. SPL Long-Term118 dB @ 1m
• Low-Frequency Crossover Type6 dB / octave, time offset corrected
• High-Frequency Crossover Type12 dB / octave
• Crossover Point1800 Hz
• Input / Thru Connector TypeSpeakon-style NL-4 jack, 1/4" TS jack
• Input Impedance8 Ω
• Power Handling
  • RMS: 200 watts
  • Music: 350 watts
  • Peak: 500 watts
• Operating Temperature Range14°F to 113°F (-10°C to 45°C)
• Low-Frequency Transducer
  • Diameter: 10"
  • Voice Coil Diameter: 2"
  • Magnet Material: ferrite
• High-Frequency Transducer
  • Diaphragm Diameter: 1.4"
  • Diaphragm Material: heat treated titanium
  • Horn Exit Diameter: 1"
• Horn Design
  • Type: conical and exponential
  • Mouth Size (WxH): 12" x 7"
  • Horizontal Coverage: 90° (1kHz - 20kHz)
  • Vertical Coverage: 80° (1kHz - 20kHz)
• Driver Protectiondynamic protection for compression driver
• Construction Features
  • Basic Design: asymmetrical trapezoidal
  • Material: polypropylene
  • Handles: one on right side, one on top
  • Grille: perforated metal with weather-resistant coating
• Dimensions (HxWxD)21.5" x 13.2" x 12.4"
• Weight26 pounds