Mackie MR824 8-Inch Powered Studio Monitor

Mackie MR824 8-Inch Powered Studio Monitor offers professional performance, clarity and superior mix translation so you can listen with confidence knowing your mix will sound great anywhere.

Drawing from Mackie's extensive studio monitor design experience, MR Series monitors are precision tuned to stay true to your mix whether it's dialogue, hip hop, rock and beyond.

Mackie's proven logarithmic waveguide provides an ultra-wide listening sweet spot and enhanced stereo imaging while the Acoustic Space controls allow you to adjust the frequency response of the monitor to match your studio.

Mackie MR824 Features

• 1" silk dome tweeter provides fast transient response for detailed high end and vocal clarity
• Polypropylene woofer delivers responsive, dynamic low frequency response
• Bi-amplified Class A/B amplification: 85 watts
• Frequency response: 35 Hz to 20 kHz
• Optimize MR monitors for your mixing environment
• Professional MDF cabinet design built to last and look great in any studio
• Flexible inputs for smple connection to almost any audio source
• Acoustically optimized with sound-tightening acoustic absorption material

• MR824 8-Inch Powered Studio Monitor1

• Acoustic Performance
  • Frequency Response (-3dB): 38Hz-20kHz
  • Frequency Response (-10dB): 35Hz-20kHz
  • SPL @ 1 meter, +/-4 dBu into Balanced Input: 107dB SPL @ 1m
  • Maximum SPL Per Pair: 113 dB SPL @ 1m
• Transducers
  • Low Frequency: 8"/203mm polypropylene woofer
  • High Frequency: Neodymium magnet driven 1"/25mm silk dome tweeter
• Amplifiers
  • Low Frequency Power: 55W, 4 Ohm load, 110W peak
  • High Frequency Power: 30W, 6 Ohm load, 60W peak
  • Type: Monolithic IC, Class AB with DMOS power stage
• Electronic Crossover
  • Crossover Type: 24dB/octave
  • Crossover Frequency: 1.9kHz
  • Sensitivity: +4 dBu at 300 Hz for full output
  • Input Impedance: 20 kOhm, balanced bridging; 10kOhm unbalanced
• EqualizationHigh Frequency EQ: +/-2dB @ 3kHz and above
• AC Power Requirements
  • Power Requirements
    • ~120V, 60Hz
    • ~220V - 240V, 50/60Hz
    • ~100V, 50/60Hz
    • Note: MR Monitors do not support multiple voltage configurations. Make sure the voltage rating for your particular model (as indicated on the rear panel near the IEC socket) corresponds with your local AC mains voltage
    • AC Connector: 3-pin IEC 250 VAC, 15A male
    • Fuse
      • 115 VAC: T 2 AL/250V
      • 230 VAC: T 1 mAL/250V
    • Power Consumption: 150W with music, loud mix; 12W quiescent (idle)
• Physical Dimensions and Weight
  • Enclosure: 0.59"/15mm thick MDF with 1.3"/33mm MDF front panel
  • Dimensions (HxWxD): 15.7x10.1x12.6" (400x256x320mm)
  • Weight: 23 lbs (10.4kg)