Note: Lens sold separately.
The PT-MZ10K features a dedicated and original sealed cooling system for the phosphor wheel, which is made of durable, heat-resistant inorganic material. Extensive shielding around the phosphor-wheel assembly protects against dust-particle intrusion for extended reliability and consistent brightness.
Multi-Drive Laser Optical Engine groups laser diodes into multiple laser modules. If one diode in a module fails, only a limited number of diodes in the affected series are bypassed. The remaining diodes continue to operate, maintaining close to full brightness. If a laser diode fails in other projectors, the entire module shuts down, resulting in a dramatic loss of brightness. This projector adds an invaluable layer of insurance when image presentation must not be interrupted.
Panasonic PT-MZ10KL Features
- Lens sold separately
- Supports 4K Signal Input
- First LCD Projectors to Support Geometry Manager Pro Software
- Geometric Adjustment with Free Grid Correction via Remote Control
- Quiet Operation for Distraction-free Viewing
- Detail Clarity Processor 4 Provides Pin-Sharp Insight
- Color Adjustment Function
- PT-MZ10KL 10,000 Lumen Laser Projector1
- Projector typeLCD projectors
- Light source Laser diodes
- Light output*[1] 10,000 lm
- Time until light output declines to 50 %*2 20,000 hours (NORMAL)
- Resolution 1920 x 1200 pixels
- Contrast Ratio*[1] 3,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]
- Center-to-corner zone ratio*[1] 85 %
- LENS Optional powered zoom lenses
- Lens shift | Vertical (from center of screen) ±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered)
- Lens shift | Horizontal (from center of screen) ±20 % (±19 % with ET-EMW200) (powered)
- Keystone correction range Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300)
- Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500), Horizontal: ±40° (±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500)When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
- Installation Ceiling/floor, front/rear, free 360-degree installation
- Terminals | SDI IN BNC x 1: 3G/HD-SDI input
- Terminals | HDMI IN HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3)
- Terminals | DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
- Terminal | RGB In D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
- Terminals | SERIAL/MULTI PROJECTOR SYNC IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- Terminals | SERIAL/MULTI PROJECTOR SYNC OUT D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
- Terminals | REMOTE 1 IN D-sub 9-pin (female) × 1 for external control (parallel)
- Terminals | REMOTE 2 IN M3 x 1 for wired remote control
- Terminals | Remote 2 Out M3 x 1 for link control (for wired remote control)
- Terminals | LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
- Terminals | DIGITAL LINK RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K/60p signal input*3)
- Terminals | DC OUT USB Connector (Type A) x 1 (Output 5 V/2 A)
- Power supply AC 100-240 V, 50/60 Hz
- Power consumption 640 W
- Cabinet materials Molded plastic
- Filter Included (Estimated maintenance time: approx. 20,000 hours)
- Operation noise*[1] 35 dB (NORMAL) / 30 dB (Quiet)
- Dimensions (WxHxD) 650 x 211*[4] x 440 mm (25 19/32˝ x 8 5/16˝*4 x 17 21/64˝ ) (Without lens)
- Weight*[5] Approx. 22.3 kg (49.2 lbs)
- Operating environment Operating temperature: 0–45°C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation)
- Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit),Smart Projector Control for iOS/Android™
- Note
- *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
- *2 Around this time, light output will have decreased by approximately 50%. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [2], under conditions with 35°C (95°F), 700m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50% varies depending on environment.
- *3 4K signals are converted to theprojector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.
- *4 With legs at shortest position.
- *5 Average value. May differ depending on the actual unit.
- *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level,and the operating environment temperature becomes 35°C (95°F) or higher, the light output may be reduced to protect the projector.
- Screen size [diagonal] 2.03–12.7 m (80–500 in), 16:10 aspect ratio
- Light output 10,000 lm
- LCD panel | Panel size 25.4 mm (1.0 in) diagonal (16:10 aspect ratio)
- LCD Panel | Number of pixels 2,304,000 ( Pixels 1920 x 1200) pixels x 3
