Panasonic PT-MZ570 5500 Lumen WUXGA 3LCD Projector

Sold with and without lens

The PT-MZ570 features high-brightness that enables clear and vivid large-screen projection in bright environments. This projector combines Panasonic's time-proven LCD with industry-leading SOLID SHINE Laser light-source technology to achieve consistent high-quality pictures and extremely stable performance. Flexible installation in corporate or educational facilities is complemented by an efficient Eco Filter, which helps to extend maintenance to about 20,000 hours.

Multi-Drive Laser Optical Engine groups laser diodes into multiple laser modules. If one diode in a module fails, only a limited number of diodes in the affected series are bypassed. The remaining diodes continue to operate, maintaining close to full brightness. If a laser diode fails in other projectors, the entire module shuts down, resulting in a dramatic loss of brightness. This projector adds an invaluable layer of insurance when image presentation must not be interrupted.

Panasonic PT-MZ570 Features

• Sold with and without lens
• Supports 4K Signal Input
• Single-Cable DIGITAL LINK Connection for AV and Control Signals
• Powered Lens Shift, Zoom, and Focus
• Auto Image Rotation
• Quiet Operation
• Free 360-degree Installation

• Panasonic PT-MZ570 5500 Lumen WUXGA 3LCD Projector1

• TechnologyLaser LCD
• Brightness 5,500 lumens
• Power supply AC 100-240 V, 50/60 Hz
• Power consumption
  • *1 450W (during standby)
  • Approx. 0.5W (When [STANDBY MODE] is set to [ECO])
  • Approx. 22W (When [STANDBY MODE] is set to [NORMAL])
  • Approx. 47W (When [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON], maximum audio is output, and USB memory is inserted in the terminal)
  • Approx. 115W (When [QUICK STARTUP] is set to [ON], [IN STANDBY MODE] in [AUDIO SETTING] is set to [ON], maximum audio is output, and the power is supplied from the terminal)
• BTU value Max 1,536BTU
• LCD panel | Panel size 19.3 mm (0.76 inches) diagonal (16:10 aspect ratio)
• LCD panel | Display method Transparent LCD panel (x 3, R/G/B)
• LCD panel | Drive method Active matrix method
• LCD panel | Pixels 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels
• Lens | PT-MZ570 Powered zoom (1.6×), focus lenses, F 1.7? 2.3, f 26.8? 45.5 mm
• Throw ratio 1.6?2.8:1
• Lens | PT-MZ570L Optional powered zoom/focus lenses and fixed-focus lens
• Light sourceLaser Diode Laser class 1 (Class3R for US models)
• Illumination life of set
  • Varies depending on operation mode setting.
  • 20,000 hours at half luminance
  • * IEC62087: 2008 Broadcast contents, Dynamic contrast [2],
  • Temperature: 30°C (86F), Under conditions of 0.15 mg/m 3
  • of particulate matter
• Projection size 1.02?10.16 m (40?400 inches) diagonally, 16:10 a spect ratio
• Colors Full color ( 16,777,216 colors)
• Light output *1 5,500 lumens (Input signals: PC, Operating mode: Normal, Dynamic mode)
• Center-to-corner uniformity 90%
• Contrast Ratio
  • *1 3,000,000:1(all white/all black)(Dynamic Contrast 1 or 2)
  • (Input signals: PC, Operating mode: Normal, Dynamic mode)
• Resolution WUXGA 1920 x 1200 pixels
• Scanning frequency | RGB fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 162 MHz or less
• Scanning frequency | YPBPR(YCBCR) 480i (525i): fH 15.73 kHz; fV 59.94 Hz, 576i (625i): fH 15.63 kHz; fV 50 Hz, 480p (525p): fH 31.47 kHz; fV 59.94Hz, 576p (625p): fH 31.25 kHz; fV 50 Hz, 720 (750)/60p: fH 45.00 kHz; fV 60 Hz, 720 (750)/50p: fH 37.50 kHz; fV 50 Hz, 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz, 1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz, 1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz, 1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz, 1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz, 1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
• Scanning frequency | Video
  • fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz
  • [NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM]
• Scanning frequency | HDMI/DIGITAL LINK
  • Moving image signal resolution: 480i ( 525i)*2, 576i ( 625i)*2, 480p ( 525p), 576p ( 625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p, 1080 ( 1125)/24p, 1080 ( 1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p, 1080 ( 1125)/50p
  • Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
  • Dot clock frequency: 25 MHz to 162 MHz
• Optical axis shift
  • Vertical ±67%, Horizontal ±35% (Supplied lens/ET-ELS20/ET-ELW20/ET-ELT20/ET-ELT21)
  • Vertical ±60%, Horizontal ±30% (ET-ELW22)
  • NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
• Installation Ceiling/desk/AUTO, front/rear, 360 degree free installation
• Speaker 4.0 cm round-type x 1
• Maximum usable volume output10W (monaural)
• Terminals | HDMI 1 IN
  • HDMI 19 pin, HDCP and Deep color compatible
  • Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
• Terminals | HDMI 2 IN
  • HDMI 19 pin, HDCP and Deep color compatible
  • Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
• Terminals | RGB 1 IN BNC (female) x 5, RGB/Y PB/PR (CB/CR)
• Terminals | RGB 2 IN D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
• Terminals | MONITOR OUT D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
• Terminals | VIDEO IN Pin jack x 1
• Terminals | AUDIO IN 1 M3 stereo jack x 1(L-R)
• Terminals | AUDIO IN 2 M3 stereo jack x 1(L-R)
• Terminals | AUDIO IN 3 Pin jack x 2(L-R)
• Terminals | VARIABLE AUDIO OUT M3 jack, 0 V[rms] to 2.0 V[rms] variable, output imedance 2.2 k ohms and less
• Terminals | SERIAL IN D-sub 9 pin, RS-232C compliant, for computer control use
• Terminals | REMOTE 1 D-Sub 9 p (female) x 1, for external control (parallel)
• Terminals | REMOTE 2 M3 jack x 1(L-R) for link control (for wired remote control)
• Terminals | LAN RJ-45 x 1 for network connection, 10/100Base-TX, compliant with PJLink™(Class 2)
• Terminals | DIGITAL LINK/LAN RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 2), Deep Color, HDCP
• Terminals | VIEWER / PAIRING USB type-A x 1
• Terminals | DC OUT USB type-A x 1(DC 5V, 2A(Max) )
• Power cord length 3.0m(9ft 10in)
• Cabinet materials Molded plastic
• Dimensions (WxHxD)
  • PT-MZ570: 560 x 205*4x 443mm (22-1/16 x 8-1/16*4x 17-7/16inches) (with supplied lens)
  • PT-MZ570L: 560 x 205*4x 428mm (22-1/16 x 8-1/16*4x 16-27/32inches) (without lens)
• Weight
  • *5
  • PT-MZ570: Approx. 16.9 kg (37.3 lbs) (with supplied lens)
  • PT-MZ570L: Approx. 16.1 kg (35.5 lbs) (without lens)
• Noise level *1 32dB (Operating mode: NORMAL/ECO), 26dB (Operating mode: QUIET)
• Operating environment | Temperature
  • 0°C (32°F) to 45°C (113°F)
  • The projector cannot be used at an altitude of 2,700 m (8,858') or higher above sea level.
  • The light output may decrease to protect the projector when the operating environment temperature exceeds 36 °C (96.8 °F).
• Operating environment | Humidity 20% to 80% (no condensation)
• Note
  • Weights and dimensions shown are approximate. Specifications subject to change without notice.
  • *1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • *2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) for 480i(525i) and 576i(625i)
  • *3 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55° .
  • *4 When adjustable feet shortened.
  • *5 Average value. May differ depending on models.
  • *6 Can be used when the ET-WM300 (option) is installed.
  • *7 When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.: ET-PKD120H (for High Ceilings) or
  • E T-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector Mount Bracket)), it is necessary to replace the drop- prevention wire rope with the one corresponding to this projector. Consult your dealer. Drop-prevention set (service model no.: DPPW1004Z A/X1)
  • *8 The suffix of the Model No. differs according to the license type.