Panasonic PT-MZ670U 6500 Lumen 3LCD SOLID SHINE Laser Projector

The Panasonic PT-MZ670U is designed for single-screen projection and equipped with advanced collaboration technologies for education and corporate use. Digital Link - Optional wireless functions 5 Ghz - 360° flexible installation. This is a flexible and cost-efficient Solid Shine laser projector.

Panasonic PT-MZ670U Features

• Laser LCD, 6,500 lumens, WUXGA
• Compact and lightweight body, designed with ultra-low noise operation (28dB)
• Exchangeable lenses (compatible with PT-EZ770 series lenses) for flexible installation in any meeting- or classroom
• Packed with a wide range of collaboration technologies such as 5 Ghz wireless projection from multiple devices, secure streaming & networking, PC-less presentation, audio loop-through and others
• Long lasting laser light source and low-maintenance design provide high brightness and superb image quality

• PT-MZ670U 6500 lumens 3LCD Solid Shine laser projector1
• Remote control unit1
• Power cord1
• AAA battery (for remote control)2

• Brightness6,500 lumens
• Technologylaser LCD
• Power SupplyAC 100-240V, 50/60Hz
• Power Consumption
  • 525W (6.0A - 2.5A)
  • Standby Mode Set to Eco: approx. 0.5W
  • Standby Mode Set to Normal: approx. 22W
  • Standby Mode in Audio Setting: approx. 47W
  • Quick Startup On in Standby Mode with Audio Setting On: approx. 115W
• BTU Valuemax. 1,792BTU
• LCD Panel
  • Panel Size: 19.3 mm (0.76 inches) diagonal (16:10 aspect ratio)
  • Display Method: Transparent LCD panel (x 3, R/G/B)
  • Drive Method: active matrix method
  • Pixels: 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels
• Lens (when included)Powered zoom ( 1.6x), focus lenses, F 1.7- 2.3, f 26.8- 45.5 mm Throw ratio 1.6-2.8:1
• Light SourceLaser Diode Laser class 1(Class3R for US models )
• Illumination Life of SetVaries depending on operation mode setting. 20,000 hours at half luminance * IEC62087: 2008 Broadcast contents, Dynamic contrast [2], Temperature: 30°C (86F), Under conditions of 0.15 mg/m3 of particulate matter
• Projection Size1.02-10.16 m ( 40- 400 inches) diagonally, 16:10 aspect ratio
• ColorsFull color ( 16,777,216 colors)
• Light Output*1 6,500 lumens (Input signals: PC, Operating mode: Normal, Dynamic mode)
• Center-to-corner Uniformity90%
• Contrast Ratio*1 3,000,000:1(all white/all black)(Dynamic Contrast 1 or 2 ) (Input signals: PC, Operating mode: Normal, Dynamic mode)
• ResolutionWUXGA 1920 x 1200 pixels
• Scanning Frequency
  • RGB: fH: 15- 91kHz, fV: 24 - 100Hz, dot clock: 162 MHz or less
  • YPBPR(YCBCR)
  • 480i (525i): fH 15.73 kHz; fV 59.94 Hz,
  • 576i (625i): fH 15.63 kHz; fV 50 Hz,
  • 480p (525p): fH 31.47 kHz; fV 59.94 Hz,
  • 576p (625p): fH 31.25 kHz; fV 50 Hz,
  • 720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
  • 720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
  • 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
  • 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
  • 1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz,
  • 1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
  • 1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz,
  • 1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz,
  • 1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
  • 1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
  • Video
  • fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz
  • [NTSC/NTSC4.43/PAL/PAL60/PAL-N/PAL-M/SECAM]
  • HDMI/DIGITAL LINK
  • ・Moving image signal resolution:
  • 480i ( 525i)*2, 576i ( 625i)*2, 480p ( 525p), 576p ( 625p), 720 (750)/60p,
  • 720 (750)/50p, 1080 ( 1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p,
  • 1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p, 1080 (1125)/60p, 1080 (1125)/50p
  • Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace)
  • ・Dot clock frequency: 25 MHz to 162 MHz
• Optical Axis Shift
  • Vertical ±67%, Horizontal ±35% (Supplied lens/ET-ELS20/ET-ELW20/ET-ELT20/ET ELT21)
  • Vertical ±60%, Horizontal ±30% (ET-ELW22)
  • NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21
• Installationceiling/desk/AUTO, front/rear, 360 degree free installation
• Speaker4.0 cm round-type x 1
• Max. Usable Volume Output10 W (monaural)
• Terminals
  • HDMI 1 IN: HDMI 19 pin, HDCP and Deep color compatible; Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
  • HDMI 2 IN: HDMI 19 pin, HDCP and Deep color compatible; Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz)
  • RGB 1 IN: BNC (female) x 5, RGB/Y PB/PR (CB/CR)
  • RGB 2 IN: D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
  • MONITOR OUT: D-Sub 15 p (female) x 1, RGB/Y PB/PR (CB/CR)
  • VIDEO IN: Pin jack x 1
  • AUDIO IN 1: M3 stereo jack x 1(L-R)
  • AUDIO IN 2: M3 stereo jack x 1(L-R)
  • AUDIO IN 3: Pin jack x 2(L-R)
  • VARIABLE AUDIO OUT: M3 jack, 0 V[rms] to 2.0 V[rms] variable, output imedance 2.2k ohms and less
  • SERIAL IN: D-sub 9 pin, RS-232C compliant, for computer control use
  • REMOTE 1: D-Sub 9 p (female) x 1, for external control (parallel)
  • REMOTE 2: M3 jack x 1(L-R) for link control (for wired remote control)
  • LAN: RJ-45 x 1 for network connection, 10/100Base-TX, compliant with PJLink™(Class 2)
  • DIGITAL LINK/LAN: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compliant with PJLink™(Class 2), Deep Color, HDCP
  • VIEWER/PAIRING: USB type-A x 1
  • DC OUT: USB type-A x 1(DC 5V, 2A(Max) )
• Noise Level*1 32dB (Operating mode: NORMAL/ECO), 26dB (Operating mode: QUIET)
• Cabinet Materialsmolded plastic
• Power Cord Length9.8 ft
• Operating Temperature32 to 113°F (0 to 45°C) light output may decrease to protect the projector when temperature passes 96.8°F (36°C)
• Altitudeprojector cannot be used at an altitude of 8,858 ft (2700m) or higher above sea level)
• Operating Humidity20 to 80% (no condensation)
• Weight*5 approx. 36 pounds
• Dimensions (WxHxD)22.1" x 8.1" x 16.84"
• Note
  • *1 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standard
  • *2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) for 480i(525i) and 576i(625i)
  • *3 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°
  • *4 When adjustable feet shortened
  • *5 Average value. May differ depending on models
  • *6 Can be used when the ET-WM300 (option) is installed
  • *7 When the projector is mounted to the existing Ceiling Mount Bracket (in combination with the Model No.: ET-PKD120H (for High Ceilings) or E T-PKD120S (for Low Ceilings), and the Model No.: ET-PKE300B (Projector Mount Bracket)), it is necessary to replace the drop- prevention wire rope with the one corresponding to this projector. Consult your dealer. Drop-prevention set (service model no.: DPPW1004Z A/X1)
  • *8 The suffix of the Model No. differs according to the license type