Panasonic PT-MZ780 7000 Lumen WUXGA Laser Projector

The PT-MZ780 from Panasonic is a 7000 Lumen WUXGA laser projector with a refined Multi-Laser Drive Engine for the optimal balance of high brightness, vivid color, and low-maintenance operation.

Panasonic PT-MZ780 Features

• Laser LCD, 7 000 lumens, WUXGA
• Compact and lightweight body, designed with ultra-low noise operation (26dB)
• Wide Lens shift area and Ultra-Short Throw lens to expand installation capability
• Edge Blending function to realize versatile space creation
• Significant contribution to sustainability thanks to low Power consumption and Washable Eco Filter

• PT-MZ780 7000 Lumen WUXGA Laser Projector1

• Projector typeLCD projectors
• LCD panel | Panel size (mm) 19.3 mm diagonal (16:10 aspect ratio)
• LCD panel | Panel size (inch) 0.76 inch diagonal (16:10 aspect ratio)
• LCD Panel | Display Method Transparent LCD panel (x 3, R/G/B)
• LCD Panel | Drive Method Active matrix
• LCD Panel | Pixels 2,304,000 ( Pixels 1920 x 1200) pixels x 3
• Light Source Laser diodes
• Light Output*1 *2 7,000 lm
• Resolution WUXGA (1920 x 1200 pixels
• Contrast Ratio*1 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] is set to [1] or [2]. HDMI signal input)
• Screen size (diagonal) (mm) 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio
• Screen size (diagonal) (inch) 1.02–10.16 m (40–400 in), 1.52–10.16 m (60–400 in) with the ET-ELW22, 2.54–10.16 m (100–400 in) with the ET-ELU20, 16:10 aspect ratio Center-to-corner zone ratio*1:85 %
• Lens Powered zoom (throw ratio 1.61–2.76:1), powered focus F = 1.7–2.3, f = 26.8–45.5 mm (for supplied lens; optional lenses also available)
• Lens shift | Vertical(From the origin point of the lens mounter) ±67 % (powered) (for supplied lens; optional lenses also available*4)
• Lens shift | Horizontal(From the origin point of the lens mounter) ±35 % (powered) (for supplied lens; optional lenses also available*4)
• Keystone Correction Range Vertical: ±25 °, Horizontal: ±30 ° (for supplied lens; optional lenses also available*4)
• Installation Ceiling/floor, front/rear, free 360-degree installation
• Terminals | HDMI In HDMI 19-pin x 3 (Compatible with HDCP 2.3, Deep Color, 4K/60p*5 signal input), CEC supported
• Terminals | Computer InD-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
• Terminals | Monitor Out D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR)
• Terminals | Serial / Multi Sync In D-sub 9-pin (female) x 1 for external control/link control (RS-232C compliant)
• Terminals | Multi Sync Out D-sub 9-pin (male) x 1 for link control
• Terminals | Remote 1 In M3 stereo mini-jack x 1 for wired remote control
• Terminals | Remote 2 In D-sub 9-pin (female) x 1 for external control (parallel)
• Terminals | Audio In M3 stereo mini-jack x 1
• Terminals | Audio Out M3 stereo mini-jack x 1
• Terminals | DIGITAL LINKRJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color,4K/60p*5 *6 signal input)
• Terminals | LAN RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)
• Terminals | DC Out USB Connector (Type A) x 1 (Output 5 V/2 A)
• Power Supply AC 100–240V, 50/60 Hz
• Power Consumption*7 | Maximum power consumption 435W (4.8–2.3 A) (460 VA)(Power consumption is 415W at 200–240V
• Power Consumption*7 | On-mode power consumption (Light power) [NORMAL]: 395W (100–120V), 375W (200–240 V)[ECO]: 285 W (100–120 V), 275W (200–240 V)[QUIET]: 280W (100–120V), 270W (200–240V)
• Cabinet Materials Molded plastic
• Filter Included (Estimated maintenance time: approx. 20,000 hours)
• Operation noise*1 32 dB (NORMAL/ECO), 26 dB (QUIET)
• Dimensions (W × H*8 × D) 561x224x439 mm (22 3/32˝ x 8 13/16˝ x 17 9/32˝ ) (with supplied lens)
• Weight*9 Approx. 18.6 kg (41.0 lbs) (with supplied lens)
• Operating Environment Operating temperature: 0–45 °C (32–113 °F)*10, operating humidity: 20–80 % (no condensation)
• Applicable software/application Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Smart Projector Control for iOS/Android™, Geometry Manager Pro*11
• Notes *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 When [PICTURE MODE] is set to [DYNAMIC] and [LIGHT POWER] is set to [NORMAL]. *3 Around this time, light outputwill have decreased to approximately 50 % of its original level ([PICTURE MODE]: [DYNAMIC], [DYNAMIC CONTRAST] set to [2]). Estimated time until light output declines to 50 % varies depending on environment. *4 Lens-shift range and keystone correction range may vary depending on lens.*5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. *6 YPBPR4:2:0 format only for 4K/60p signals input via DIGITAL LINK. *7 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards.On-mode power consumption measured at 25 °C (77 °F) operating temperature at an altitude of 700 m (2,297 ft).*8 With legs at shortest position.*9 Average value. May differ depending on the actual unit. *10 Note that the projector cannot be used at altitudes 2,700 m (8,858 ft) or higher abovesea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 700 m (2,297 ft) and ambient temperature is 38 °C (100 °F) or higher; when the projector is used at altitudes between 700 m (2,297 ft) and1,400 m (4,593 ft) exclusive and ambient temperature is 36 °C (97 °F) or higher; when the projector is used at altitudes between 1,400 m (4,593 ft) and 2,100 m (6,890 ft) exclusive and ambient temperature is 34 °C (93 °F) or higher; and when the projector is used at altitudes between2,100 m (6,890 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 32 °C (90 °F) or higher. *11 Some functions available in Geo Pro software are not supported by the PT-MZ880 Series.