Create immersive environments with Panasonic's adaptable 1-Chip DLP™ laser projector with detailed images rich in natural color, seamless integration and excellent 24/7 reliability. The compact Panasonic PT-RCQ80U 8000 Lumen 1-Chip DLP Laser Projector is designed for long-lasting stable brightness in events and staging.
Panasonic PT-RCQ80U Features
- Laser 1-Chip DLP, 8,000 lumens (ANSI), WUXGA, 4K Ready* laser projector
- Rich Colour Harmonizer technology for improved and more accurate colour reproduction
- Accepts 4K signal input
- Projects a 2175x1697 high-resolution image by using pixel shift technology
- Maintenance-free up to 20,000 hours maintenance-free operation with dust-resistant optical block and long lasting laser engine
- PT-RCQ80U 8000 lumen 1-chip DLP installation laser projector1
- Remote control unit1
- Power cord1
- Lens mount cover1
- Lens cover1
- AAA battery (for remote)2
- Projector Type1-Chip DLP™ projector
- DLP™ chip
- Display Method: DLP™ chip x 1, DLP™ projection system
- Pixels: 2,304,000 (1920 × 1200) pixels, 4,608,000 (2,304,000 x 2) pixels when 4K Smooth Pixel Drive set to ON
- Panel Size: 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio
- Light Sourcelaser diodes
- Resolution4K-equivalent (4K Smooth Pixel Drive: ON)
- Screen Size (diagonal)1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio
- Keystone Correction Range
- Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/DLE055, +5° with ET-DLE035)
- Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035)
- Installationceiling/floor, front/rear, free 360-degree installation
- Terminals
- SDI IN: BNC x 1: 3G/HD-SDI input
- HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2)
- DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
- MULTI PROJECTOR SYNC IN: BNC x 1
- MULTI PROJECTOR SYNC OUT: BNC x 1
- SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
- SERIAL OUT: D-sub 9-pin (male) x 1 for link control
- REMOTE 1 OUT: M3 x 1 for link control (for wired remote control)
- REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
- LAN: RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net
- Expansion Slot: SLOT for interface boards, SLOT NX compatible
- REMOTE 1 IN: M3 x 1 for wired remote control
- USB: USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)
- DIGITAL LINK: RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5
- Power SupplyAC 100-240 V, 50/60 Hz
- Contrast Ratio *110,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]
- Center-to-corner zone Ratio *190%
- Light Output8,000 lm*1 / 8,400 lm (Center)*2
- Time until light output declines to 50% *320,000 hours (normal), 24,000 hours (eco)
- Lens Shift (from center of screen) *4
- Vertical: +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)
- Horizontal: +30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)
- Applicable SoftwareLogo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™
- Cabinet Materialsmolded plastic
- Operating Humidity10-80% (no condensation)
- Operating Temperature *632-113°F (0-45°C)
- Weight *7approx. 52 pounds
- Dimensions (WxHxD) *619.59" x 7.88" x 22.88"
- Note
- *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
- *2 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcastcontents, NORMAL Mode, Dynamic Contrast [ON], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
- *3 Lens shift is not supported on theET-DLE055, and the optical axis is fixed with the ET-DLE035
- *4 With legs at shortest position
- *5 Average value. May differ depending on the actual unit
- *6 When using the projector at an altitude lower than 2,700 m (8,858 ft) above sea level, and the operating environment temperaturebecomes 30 °C (86 °F) or higher, the light output may be reduced to protect the projector. When using the projector at an altitude between 2,700 m (8,858 ft) and 4,200 m (13,780 ft), and the operating environment temperature becomes 25 °C (77 °F) or higher, the light output may bereduced to protect the projector.
