The Pliant Technologies CRT-900 CrewCom 900MHz Radio Transceiver houses a radio with corresponding antennas and serves as an access point enabling RF communications with CrewCom Radio Packs. Using CrewNet as a backbone, up to 46 RTs can be positioned on the network throughout a wide coverage area by being linked back to a Control Unit either directly, through a Hub(s), or connected in a daisy-chain configuration.
Pliant Technologies CRT-900 Features
- One RT supports up to 6 Full-Duplex Radio Packs
- Two separate RF bands available in two models (CRT-900 & CRT-2400)
- LED status indicators for data RX/TX, operation mode, and error
- CrewNet in connections (etherCON or Duplex LC Single Mode Fiber) with an addition single copper CrewNet thru connection for connecting up to a total of eight CrewCom Radio
- Transceivers in a daisy chain-configuration
- Micro USB connection for firmware updates (also available through CrewNet)
- Integrated ping function which uses all LEDs to physically identify an RT
- Dual powering options (network power or external 48VDC, sold separately)
- CRT-900 CrewCom 900MHz Radio Transceiver1
- 00003402 USB A to Micro B cable 1
- PC-CAT5-15BL Cat 5e cable, 4.6 m (15 ft.) 1
- 00003585 RT Flat Mounting Bracket1
- 00003976 Single RT Adapter Mounting Bracket1
- 00001339, 00003530, 00003683 Bracket Mounting Hardware1
- 00001693 Omni-Directional Antenna (x2) 1
- 00004021 Microphone Stand Adapter1
- D0000286 Product Overview Guide1
- D0000219 Warranty Extension Registration Card1
- RF Frequency
- 902–928 MHz
- (915–928 MHz)**
- RF SchemeFHSS with TDMA
- Effective Radiated Power 400 mW (+26 dBm)
- Receiver Sensitivity -100dBm at 10-5 BER
- Radio Certification FCCID: HSW-CCT900 and IC: 4492A-CCT900
- Transmission Range 200 m (approx. 650 ft.) under typical conditions; 600 m (approx. 1950 ft.) line of sight. Note: Functional range depends on many variables, including RF signal absorption, reflection, and external interference.
- Number of Radio Packs Supported (when RT in Normal mode) 6
- Number of Antenna Connections per RT 2
- Antenna Connector Type RP-TNC
- Supplied Antenna +2dBi Omni-directional (whip)
- CrewNet In Port (supports 1 connection) (1) RJ-45 for copper; (1) duplex LC for Single Mode Fiber
- RT Loop Port (1) RJ-45
- Maximum CrewNet Line Length Copper 100 m (330 ft.); Fiber 10,000 m (32,800 ft.)
- Network Power (Power-over-CrewNet) CrewNet RJ-45 only
- External Power 48VDC Power Supply, PPS-48V (Sold Separately)
- Dimensions without Antennas (LxWxH) 16×19.7×4.6 cm (6.3×7.74×1.81 in.)
- Weight 1.25 lbs (567 g)
- Operating Environment -20° to 50° C (-4° to 122° F); 10% to 90% Humidity
- Maximum Altitude 2,000 m (6,562 ft.)
- RoHS Yes
- Compliance Model Number RT2505 Notes *900MHz products only available in North America, Australia, and New Zealand. **The CRT-900AN (Oceania) model is approved for use in Australia and New Zealand and operates within the 915–928 MHz frequency range.