The AD-P6T from QSC’s AcousticDesign series is a two-way pendant-mount loudspeaker. It’s ideal in foreground and background sound reinforcement situations utilizing 70/100V or 16Ω bypass configurations. The AD-P6T features a high-quality 6.5" weather-treated paper cone woofer with a 1" voice coil and a .75" aluminum dome tweeter. Among its many features, Intrinsic Correction™ voicings can be deployed to optimize installation and performance.
Achieve coherent transition between transducers with Directivity Matched Transition™ (DMT), QSC’s design philosophy where the high-frequency waveguide is matched to the natural conical behavior of the woofer at the crossover point. DMT’s improved off-axis power response results in consistent 150° conical coverage.
Maintain an accurate frequency response even in 70/100V applications. The AD-P6T’s low-loss, low-saturation 30-watt transformer offers selectable taps (including 16Ω bypass) and incorporates a rotary selector under the magnetic snap-fit steel grille. The speaker’s locking 4-pole Euro-block connector accepts up to four 18AWG pairs, eliminating the hassles of star topology wiring designs, while a sealable input cover protects connections from moisture.
In addition to its durable powder-coated steel back can, the AD-P6T boasts a rugged ABS baffle that uses UV inhibitors to prevent discoloration. The magnetic grille has a removable logo ideal for non-branded installations. Two quick-link cable assemblies and slip-lock fasteners are included to streamline setup.
AcousticDesign speakers are free of obtrusive branding. They’re available in black or white, as well as paintable to match any décor.
More about QSC’s AcousticDesign Series
Easy installation, flexible mounting options, and rugged, high-weather resistance are just three of the features that set QSC’s AcousticDesign™ series apart. These premium loudspeakers are designed to give contractors and integrators versatile, reliable solutions for permanent sound installations. Unified by premium audio quality and consistent tonal characteristics this series is comprised of ceiling, surface, and pendant alternatives ideal for environments where you need the perfect combination of performance, coverage, and aesthetic appeal.
QSC AD-P6T Features
- Consistent tonal characteristics across the entire AcousticDesign family in surface, ceiling, and pendant applications
- DMT (Directivity Matched Transition™) waveguide ensures smooth, uniform frequency response over the coverage area
- Snap-fit magnetic grille
- 2x quick-link suspension cables and slip-lock fasteners provided
- Intrinsic Correction™ voicings available via Q-SYS Ecosystem and CXD amplifiers
- Low-saturation and low-loss 70/100V transformers with 16Ω bypass
- Blemish-free removable logo
- Sealable input cover to prevent moisture from entering the input terminal block
- AD-P6T 6.5-Inch Pendant Speaker1
- Quick-link cable assemblies (length 3.25m/ 128-inch 2mm thickness)1
- Slip-lock fasteners1
- Locking euro-block connector1
- Sealable input cover and screws1
- Snap-fit magnetic grille1
- Effective frequency range [2] 55 Hz – 20 kHz
- Rated noise power / voltage [1] 60 watts / 31 volts (rms)
- Sensitivity [dB] [3]88 db
- Sensitivity at 4m, 100V maximum tapTBD
- Rated coverage (-6 dB) [4] 135° conical DMT™
- Directivity factor [4] 6.5
- Directivity index [4] 8 dB
- Maximum continuous SPL [5] 106 dB
- Maximum peak SPL [5] 112 dB
- Nominal impedance [ohms] 16
- Recommended amplifier 120 watts
- Transformer taps / impedance
- 16Ω (in bypass setting)
- 7.5W (70V); 15W (100V) Tap: 667Ω
- 15W (70V); 30W (100V) Tap: 333Ω
- 30W (70V); 60W (100V) Tap: 167Ω
- 60W (70V); N/A (100V) Tap: 83Ω
- LF transducer 165 mm [6.5-inch] weather treated paper cone woofer
- HF transducer 19 mm [0.75-inch] aluminum dome tweeter
- Input connector type Euroblock connector with parallel output
- Enclosure material Impact Resistant ABS
- Grille material Powder coated steel
- Ingress protection IP-34
- Operating environment Designed for indoor use
- Operating temperature range -20 to 50° C [-4 to 122° F]
- Net weight 4.1 kg [9 lb]
- Product dimensions (Diameter x Height) Ø 287 x 323 mm [Ø 11.3 x 12.7-inch]
- Shipping weight11.8 lbs (5.4 kg)
- Shipping dimensions (H x W x D)13.5x16x14" (343x406x356 mm)
- Safety Agency UL1480, Transformer UL registered per UL1876, ROHS, CE compliant. Baffle meets UL94-V0 and UL94-5VB flammability rating; in accordance with IEC60849 / EN60849 systems
- Notes
- [1] IEC Noise, 2 Hrs
- [2] -10dB from rated sensitivity
- [3] Transformer bypassed, 1W, 1m, IEC Baffle, 200-10kHz average, on-axis
- [4] 500Hz-5kHz average
- [5] Calculated from rated noise voltage and sensitivity
