Experience professional power and polish with the RMX 1450a from QSC.
This 2-channel 300W power amplifier is constructed with high-current toroidal transformers, allowing for greater 2-ohm power and low noise while still fitting into a compact build.
QSC RMX 1450a Features
- Two-channel, 300W power amplifier
- For sound reinforcement, live concerts, entertainment, special events, portable PA, instrumental performances, and more
- Compact size — up to 2500W in two rack spaces, or 5000W in three rack spaces
- High-current toroidal transformers, for greater 2-ohm power and low noise
- Independent user-defeatable clip limiters reduce distortion
- Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
- Operates on a standard 15 amp plug (120V)
- A dual mono, high-current power supply enhances reliability and performance
- Combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
- Balanced 1/4” (6.3 mm) TRS, XLR, and barrier strip inputs
- Touch-proof binding post and Neutrik Speakon® outputs
- Front mounted gain controls for easy access
- Signal and clip LED indicators for monitoring performance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- RMX 1450a 2-Channel 300W Power Amplifier1
- Three Year Warranty plus optional 3-year extended service contract1
- Output Power per Channel
- 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD: 260W
- 8Ω, EIA 1 kHz, 0.1% tdD: 300W
- 4Ω, FTC 20 Hz–20kHz, 0.1% tdD: 400W
- 4Ω, EIA 1 kHz, 0.1% tdD: 500 W (0.5% tdD)
- 2Ω, FTC 20 Hz–20 kHz, 1% tdD: NA
- 2Ω, EIA 1 kHz, 1% tdD: 700W
- Power, Bridge-Mono Mode
- 8Ω, FTC 20 Hz–20 kHz, 0.1% tdD: 800W
- 8Ω, EIA 1 kHz, 0.1% tdD: 900W
- 4Ω, EIA 1 kHz, 1% tdD: 1400W
- Signal to Noise (20Hz–20kHz)-100 dB
- Distortion (SMPTE-IM)< 0.01%
- Input Sensitivity at 8Ω1.15V (+3.4dBu)
- Voltage Gain40x (32 dB)
- Output CircuitryClass AB
- Current Draw (120V AC)
- Typical, 1/8 power pink noise at 4Ω*: 6.0A
- Severe, 1/3 power pink noise at 4Ω*: 9.6A
- AC Mains Plug
- 100/120V: NEMA 5-15
- 2:30W: CEE7/7
- Distortion (typical)
- 20 Hz–20 kHz, 10 dB below rated power: < 0.03% tdD, 4Ω and 8Ω
- 1 kHz and below, full rated power: < 0.03% tdD, 4Ω and 8Ω
- Frequency Response20Hz–20kHz: +0/-1 dB -3 dB points: 5Hz and 50kHz (LF filter bybassed, 8Ω)
- Damping Factor (1kHz and below)> 300 at 8Ω
- Input Impedance10kΩ unbalanced; 20kΩ balanced
- Input Stage Clipping10V rms (+22 dBu)
- CoolingContinuously variable speed fan, back-to-front air flow
- Connectors (each channel)
- Input: Active balanced; 3-pin Euro-style detachable terminal block and XLR (pin 2+)
- Output: Touch-proof binding posts; Neutrik Speakon®
- Controls
- Front: AC switch; Channel 1 & 2 gain knobs
- Rear: 10-position DIP switch
- LED IndicatorsPower on: Green; Signal: Yellow (1 per channel); Clip/Protect: Red (1 per channel)
- Amplifier ProtectionFull short circuit, open circuit, tdermal, ultrasonic, RF protection. Stable into reactive or mismatched loads
- Load ProtectionTurn-on/off muting; AC coupling (850, 1450); Triac crowbar (1850HD, 2450, 4050HD, 5050) on each channel
- Product Dimensions (H×W×D)3.5 (2 RU) × 19 × 15.9 in (89 (2 RU×482×404 mm)
- Carton Dimensions (H×W×D)24×22×6 in (610×560×153 mm)
- Net Weight40 lbs (18.2 kg)
- Shipping Weight46 lbs (20.9 kg)
- Power Requirements100, 120, 230V AC (factory configured), 50–60Hz
Designed for Versatility
The RMX 1450a includes balanced 1/4-inch (6.3 mm) TRS, XLR, and barrier strip inputs, as well as touch-proof binding post and Neutrik Speakon® outputs. Its selectable low-frequency filters (30 Hz or 50 Hz) protect speakers while increasing headroom, and independent DC and thermal overload protection function on each channel automatically protect the amp and any connected speakers. Controls at the front panel allow easy access and gain adjustment, as well as easy-to-read LED indicators for signal and clip monitoring.
More about QSC’s RMX Power Amplifiers
TAchieve professional-caliber performance without breaking the bank. The RMX series is comprised of three 2-rack space models (with a power range of 430 to 1200 watts per channel at 2 ohms) and two 3-rack space models (with a power range of 2000 to 2500 watts per channel at 2 ohms). All models sport a compact chassis (less than 16” deep), resulting in a build that’s easy to incorporate into any size of setup.
Power amplifiers are beneficial wherever you have a low-level audio signal that needs a boost. This includes sound reinforcement, live concerts, entertainment, and special events, portable PA, home audio (theater, studio, office), or instrumental performances. In particular, a common need for power amplifiers is any audio setup that uses passive loudspeakers. Choose from a variety of power amplifier models to meet specific wattage or channel configuration requirements for your particular project.
Boasting a comprehensive set of features, including XLR and 1/4-in balanced inputs, Speakon® and binding post outposts for convenient connectivity, user-defeatable clip limiters, and selectable low-frequency filters to optimize sonic performance—RMX power amps are packed with the functionality you need to power your project.
