The WL2102 from QSC is a dual 10”-wide line array speaker. Part of the WideLine-10 line array system, this speaker is constructed of industry-standard birch plywood and weighs 83 lbs (37.7 kg). Its exceptionally wide 140° horizontal coverage pattern reduces the need for fill speaker. The mechanical design allows composite and plywood enclosures to be arrayed together.
More about QSC’s WideLine-10 System
The clear choice for compact sound, the WL-10 loudspeaker system is part of QSC’s revolutionary WideLine family. Line array speaker systems are becoming more prevalent in an ever-expanding range of applications of all shapes and sizes. WL-10 design delivers accurate audio performance, rapid set-up, and reduced labor requirements that make it an ideal choice for mobile and installed applications including ballrooms, theaters, nightclubs, houses of worship, and small to medium size corporate events.
Characteristic WideLine dispersion reduces the number of speakers you need to fill your space with awesome audio and gives you more flexibility in speaker placement. It has a bass response of 55 Hz (-3 dB) in a small format package, making it capable of reproducing full-range audio without the need for external subwoofers or bass modules. It is easy to transport and set up; these features, plus its self-contained rigging software, make the WL-10 system great for standalone sound reinforcement.
Keep your amp requirements to a minimum. WL-10 models boast a 3-way, bi-amp, or tri-amp design. Both drivers cover low frequency, while only one extends into the mid-range, thus maintaining horizontal dispersion control at crossover. Meanwhile, high frequencies are handled by a premium, 3" diaphragm neodymium compression driver mounted on proprietary multiple apertures diffraction-slot waveguide. Internal, mid-frequency shading can be switched to either a 10" (254 mm) transducer; with the simple flip of a switch, you can use enclosures as house right or left with selectable shading.
WideLine-10 is compatible with EASE Focus software, which helps you design and deploy the WL-10 array. With the ability to demonstrate acoustical response and SPLs throughout the venue in a two-dimensional illustration, EASE Focus calculates the number of enclosures required for a given space, determining the optimal placement, and suggesting the best mounting methods.
QSC WL2102-w Features
- Multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
- Exceptionally high output capability in a very compact form factor
- Bi-amp or tri-amp design
- Dual 10" long excursion, high power, low-frequency transducers
- Single 3" diaphragm neodymium compression driver
- Birch ply construction
- Fully captive hardware design incorporates all components necessary for box to box rigging
- WL2102-w dual 10-inch wide line array speaker1
- Configurationbi-amp or tri-amp mode
- Transducers
- High-Frequency: 1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
- Low-Frequency: 2 x 400W, 16Ω 10" woofer, 3" voice coil, ceramic magnet assembly
- Frequency Response (±3dB)55Hz - 18,000Hz (with recommended DSP processing)
- Frequency Range (-10dB)48Hz - 20,000Hz (with recommended DSP processing)
- Nominal Impedance
- HF: 16Ω
- LF bi-amp Mode: 8Ω
- LF tri-amp Mode: 16Ω (x2)
- Continuous Power Capacity / Recommended Power
- HF: 80 W / 300 W (2 hours, AES1984-2 method, 1 – 10 kHz)
- LF bi-amp Mode: 600 W / 1400 W (2 hours, AES1984-2 method, 80 – 800 Hz)
- LF tri-amp Mode: 400 W / 700 W (x 2) (2 hours, AES1984-2 method, 80 – 800 Hz)
- Sensitivity (1W at 1m)
- HF: 107.5 dB (single cabinet measured in free space.)
- LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
- Max. Output - Continuous / Peak (SPL at 1m)
- HF: 127 dB / 133 dB
- LF: 127 dB / 133 dB
- Nominal Coverage
- H: 140°
- V: dependent on number of elements used
- Cabient Typeported / trapezoidal
- Enclosure MaterialBaltic birch plywood
- Grilleperforated, formed powder coated steel
- Connectors2 x Neutrik Speakon® NL8 in parallel
- Attachment PointsIntegral, adjustable rigging system, vertical splay adjustable in 1° increments from 0° – 10°
- Dimensions (HxWxD)10.8" x 27.4" x 20.75"
- Weight83 pounds
