The BT-Pro V2 makes it easy to quickly connect to any smartphone, tablet, or mobile device for high quality audio playback through a sound system. It wirelessly pairs over Bluetooth, eliminating the need to search for adaptor cables and providing you with the freedom to move around while staying connected. Superior audio quality is provided using the Bluetooth 5.0 protocol, allowing the BT-Pro to be used for playback even in critical listening environments. While the BT-Pro V2 is designed to last with a 14 gauge steel outer shell and high durability connectors and controls, it also has an enhanced reception range thanks to the plastic injection-molded insert, which allows wireless signals to pass through unimpeded. Balanced XLR outputs are provided for connection to pro audio equipment, with a level control to allow for easy volume adjustments, a headphone output for testing purposes, and a mono switch to reduce channel requirements when needed.
Radial BT-Pro V2 Features
- Wirelessly connect smartphones and tablets to a mixer
- Bluetooth reception of up to 30 meters (100ft)
- Dual balanced XLR outputs feed the PA system
- Powered via external supply or 48V phantom power
- Unique device ID allows multiple BT-Pro’s in a single location
- BT-Pro V2 Stereo Bluetooth Direct Box1
- Three Year Warranty, transferable1
- Audio Circuit TypeBluetooth A2DP receiver with audio line drive
- Bluetooth ComplianceBluetooth 5.0
- Data CompressionSBC Codec
- CompatibilityAll Bluetooth A2DP compliant devices
- Device Range≥30m (100’) Typical: line-of-sight
- Frequency Response20Hz to 20KHz
- Dynamic Range90dB
- Signal to Noise90dB
- Maximum Gain+4dBu (source file dependent)
- Total Harmonic Distortion0.05%
- Output Impedance150Ω
- Audio Output2x Balanced XLR-M
- Headphone Output3.5mm TRS
- Level ControlVariable, works on headphone and XLR
- Mono SwitchSums Left and Right Channels
- Ground LiftLifts pin 1 on both XLR Outputs
- Construction14 gauge steel outer shell, molded nylon insert
- FinishDurable powder coat
- Dimensions (WxHxD)3.3x5x2" (84x127x51mm)
- Weight1.1lbs (500g)
- PowerUSB-C connector (Power Only) or 48V Phantom
