Skip to main content
Radial StageBug SB-5W Wall-Mount Stereo Direct Box
Radial StageBug SB-5W Wall-Mount Stereo Direct Box
$159.99

Radial StageBug SB-5W Wall-Mount Stereo Direct Box

SoundPro Item: 10146
MPN: SB-5W WALLDI
MSRP: $192.00
$159.99
Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The StageBug SB5W is a passive stereo direct box made to fit in a standard North American single-gang electrical wall plate, providing AV integrators with an effective means of connecting an unbalanced audio source such as a laptop, smartphone, or tablet to a balanced audio system.

The StageBug SB5W provides a permanently mounted interface to connect consumer audio devices with installed pro audio systems. Front panel 3.5mm TRS and RCA connectors are provided for any stereo source and a fully variable level control makes volume adjustments easy. Inside, the SB5W employs dual transformers that convert the inputs to a low impedance balanced signal, and eliminate hum and buzz caused by ground loops. Set & forget ground lift and mono switches are also included to further reduce noise and to sum the left and right channels together if needed. The outputs of the SB5W feature screw terminals with tie down points for tie-wraps to make installation fast, efficient and permanent.

Radial StageBug SB-5W Features

  • Easy to use control panel
  • Passive design, no power needed
  • Contractor friendly screw terminals
  • Transformer isolated eliminates noise
  • StageBug SB-5W Wall-Mount Stereo Direct Box1
  • Three Year Warranty, transferable1
  • Audio circuit type Passive transformer isolated
  • Frequency response 20Hz - 20kHz
  • Dynamic range >120dB
  • Gain -3dB
  • Clip Level +17dBu
  • Total harmonic distortion 0.002%
  • Phase Deviation 0° @ 100Hz; -3° @ 50Hz
  • Input Impedance Approx 10K with 100K Load
  • Output Impedance 5k Ohms
  • Equivalent Input Noise -98dBu
  • Noise -101dBu
  • Maximum Input +20dBu
  • Features Mono Sum, Ground lift
  • Input Connectors RCA, 3.5mm TRS inputs
  • Output Connectors Screw down terminals (- G +)
  • Construction 14 gauge steel chassis & outer shell
  • Dimensions (L x W x D) 2.42 x 1.62 x 4.24 inches (61.4 x 41.1 x 107.7mm)
  • Weight 0.5 lbs (227 grams)
  • Shipping size (L x W x D) 6.25 x 4.25 x 3 inches (159 x 108 x 76mm)
  • Shipping weight 0.65 lbs (295 grams)
  • Power Passive, no power required
  • Conditions For use in dry locations only between 5°C and 40°C

In The Box

Customer Reviews