RCF ART-910A 10-Inch 2100W Powered Speaker

ART 910-A is masterfully engineered to deliver stellar audio performance and versatility for intensive audio applications. The combination of a 1.75" compression driver, 10" woofer, two-channel 2100W amplifier, and the constant directivity True Resistive Waveguide produces coherent 100° x 60° coverage for the listening area with up to 130 dB SPL, distortion-free sound. Used as a stand-alone speaker for a FOH system, satellite (with subwoofer), stage monitor, or flown, the ART 910-A packs high-performance and reliability in a compact enclosure.

RCF ART-910A Features

• 2100W Class-D bi-amplification
• 1.75" compression driver
• 10" woofer
• FiRPHASE zero degrees phase technology
• Bass Motion Control woofer excursion management
• Thermal and RMS protections
• Soft limiter
• Linear, boost, stage, and volume controls

• 1x ART-910A 10" 2100W 2-way powered speaker1

• Frequency Response50Hz - 20,000Hz
• Max. SPL130dB @1M
• Coverage (Hxv)100° x 60°
• Compression Driver1.75"
• Woofer10"
• Input Signalbal/unbal
• Input ConnectorsXLR, jack
• Input Sensitivity-2dBu / +4dBu
• Output ConnectorsXLR
• Crossover Frequencies1800Hz
• Total Power2100W peak
• High Frequencies700W peak
• Low Frequencies1400W peak
• Dimensions (HxWxD)22.52x12.99x12.2"
• Weight34.83 lbds

More about RCF’s ART 9 Powered Speakers

The ART 9 Series is an evolution of the ART speaker concept and a revolution in portable sound.

ART 9 combines raw power and technological innovation to reliably deliver superior clarity with impressive sound pressure. With RCF build quality and packed with premium features, it's the most versatile loudspeaker for professional applications—on the road, on the stage, and is also suitable for fixed installation.

With 2,100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss.

ART 9 is very energy-efficient so there is no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the back of the unit - with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight.