The TTL6-A is a high power, three way, active line source engineered to deliver high fidelity output for use indoors and outdoors, for medium to large spaces. TTL6-A provides all the advantages of line array technology, such as high direct sound, increased range and a uniform level distribution, with additional ease of use. It is the preferred sound set-up for stacked systems and when a wider dispersion is required. The 3-way TTL6-A line source is equipped with 2 x 12” low frequencies woofers, 4 x 6.5” midranges and a 3.0” voice coil compression driver with wave-guide for distinctive homogenous directivity. The integration of four channels of digital amplification and the advanced digital processing set a new standard for distortion, noise and thermal efficiency.
RCF TTL 6-A Features
- RDNet remote control
- 4 x Class D amplifier, 2200W total power
- Premium-quality DSP with optimized phase response
- 1.4" neo compression driver, 3.0" voice coil with a waveguide
- 4 x 6.0" neo midranges
- 2x12" neo woofers
- 139 dB max SPL
- Maximum output, perfect audio fidelity
- Tour grade cabinet and mechanics
- 90x30°
- TTL 6-A Dual 12-Inch Powered Speaker1
- Acoustical Specifications
- Frequency Response: 45 Hz ÷ 20000 Hz
- Max SPL @ 1m: 139 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 30°
- Transducers
- Compression Driver: 1x1.4'' neo, 3.0'' v.c
- Midrange: 4x6.0'' neo, 2.0'' v.c
- Woofer: 2x12'' neo, 3.0'' v.c
- Input/Output Section
- Input signal: bal/unbal
- Input connectors: XLR, RDNet Ethercon
- Output connectors: XLR, RDNet Ethercon
- Input sensitivity: +4 dBu
- Processor Section
- Crossover Frequencies: 200 Hz - 800 Hz
- Protections: Thermal, RMS
- Limiter: Soft Limiter
- Controls: Close, Linear, Far, 2x Presets
- RDNet: Yes
- Power Section
- Total Power: 4400W Peak, 2200W RMS
- High frequencies: 800W Peak, 400W RMS
- Mid frequencies: 1400W Peak, 700W RMS
- Low frequencies: 2200W Peak, 1100W RMS
- Connections: Powercon IN/OUT
- Standard ComplianceCE compliance: Yes
- Physical Specifications
- Cabinet/Case Material: Baltic birch plywood
- Hardware: Pole Mount, integrated
- Grille: Steel
- Dimensions
- Height: 1100mm/43.31"
- Width: 378mm/14.88"
- Depth: 468mm/18.43"
- Weight: 53 kg/116.84 lbs
About Powered Speakers at Sound Productions
Get all the features you need right out of the box with powered speakers from Sound Productions! All speakers need a sort of amplifier to function. Powered speakers (also known as active speakers or self-powered speakers) have built-in amplifiers, so they’re ready to connect to your audio source without any other required accessories—making them great for environments where space is limited.
Powered speakers are typically the go-to choice for portable use because they’re affordable, easy to set up, and simple to use as standalone sound systems. They’re great for achieving an immersive audio experience with the minimal amount of hassle—perfect for delivering a polished performance in smaller venues that may not have their own sound system installed. With fewer components to pack, they’re also a great choice for traveling events, such as mobile DJ performances or adding music to an outdoor event. Many models include other built-in features such as effects, compressors, and more to make one powered speaker virtually a standalone PA system!
