The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.
RDL EZ-MXA20 Features
- Audio Amplifier with Mic and Line Input Mixer
- 10 Watts RMS Per Channel into 8 O
- 8 Watts RMS Per Channel into 4 O
- Switch-Selectable Load Impedance on Rear Panel
- Balanced Microphone Input on XLR
- Unbalanced Line Inputs on RCA Jacks
- Switch-Selectable Phantom on Mic Input
- Bass and Treble Tone Control Equalization
- Integral Overload Limiter with LED Indicator
- Limiter Controls Overloads from Clipping
- EZ-MXA20 20W Stereo Audio Mixer Amplifier with EQ1
- Inputs (3)1.2 kΩ balanced on XLR jack, mic-level, -55 dBu Min. (for 10 W out), -11 dBu max.(1) > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. (2)
- GainOff to 74 dB (mic), Off to 32 dB (line)
- Outputs (2)Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switch-selectable output impedance
- Equalization±10 dB @ 10 kHz, ±9 dB @ 80 Hz
- Frequency Response50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz to 20 kHz (±1.5 dB, line input, 10 Watts)
- THD+N< 0.25%
- CMRR> -55 dB (mic)
- Crosstalk< -68 dB (1 kHz, line input)
- PhantomSwitch-selectable 24 V (IEC 61938: 2013)
- Noise< -70 dB (below 10 Watts, -10 dBV line input), < -65 dB (below 10 Watts, -50 dBu mic input)
- 24 Vdc power supply current170 mA (idle), 1000 mA (max.)
- Case dimensions5.75” (14.6 cm)W x 5” (12.7 cm)D
- Mounting size1/3 rack width
- Package Dimensions9.5x7x2.25".
- Shipping Weight1.435 lbs.
- WEEE weight1.015 lbs.