The RDL SF-BNC2 Bidirectional Unbalanced Stereo Audio Network Interface is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A/V systems.
RDL SF-BNC2 Features
- Dante Network Interface for Two Audio Inputs and Two Audio Outputs
- Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
- Converts Two Dante Network Audio Signals to Unbalanced Line Level
- Special Software Not Required for Module Setup
- Exceptional Low-Noise and Low-Distortion Performance
- High Resolution 24 Bit Digital to Analog Conversion
- Legendary RDL Analog Filtering Enhances Superb Audio Performance
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex® Rack Mounting or Surface Mounting
- SF-BNC2 Bidirectional Unbalanced Stereo Audio Network Interface1
- Network ConnectorRJ45 with Link and Speed indicators
- Digital Audio Ethernet ProtocolDante
- Transmission Rate100 Mbps
- Sample Rates Supported44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
- Bit Depth Supported24 bits
- Audio Operating Leve-20 dBFS = -10 dBV
- Reference Level0 dBFS = +10 dBV
- Line Inputs to Network Interface
- Inputs (4):Mini-jack Stereo or RCA jacks (2, L and R)
- Input Level (for +4 dBu/-20 dBFS):-10 dBV nominal
- Input Level (maximum):+10 dBV
- Input Impedance:> 15 kΩ
- Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
- Noise below -20 dBFS (20 to 20 kHz):< -80 dB
- Crosstalk:< -85 dB (L into R, R into L, 20 Hz to 20 kHz)
- THD+N:< 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.02% at 1 kHz (typ)
- Headroom:20 dB
- Network to Line Outputs
- Outputs (4):Mini-jack Stereo or RCA jacks (2, L and R)
- Output Level (operating):-10 dBV nominal
- Output Level (maximum):+10 dBV
- Output Impedance:40 Ω
- Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
- THD+N:< 0.1%
- Noise:< -75 dB (below -10 dBV)
- Crosstalk:< -70 dB (20 Hz to 20 kHz)
- Headroom above -10 dBV:20 dB
- Indicators (3)
- Ethernet Link and Speed (2, rear panel); Sync (front panel)
- Ambient Operating Environment:0° C to 50° C
- Power Requirement:PoE Class 0, IEEE 802.3af
- Specification Conditions:Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain
- Dimensions (WxHxD):2.79x1.68x5.77" (7.09x4.27x14.66 cm)
- Package Type:Cardboard Box
- Package Dimensions:7x4.375x2.25 in.
- Shipping Weight:1.115 lbs
- WEEE weight:0.905 lbs
- Tariff code:8543.70.9100