[OPEN-BOX] Shure GLXD14+/B98-Z3 Dual Band Wireless Instrument Mic System

The GLX-D+ Dual Band Wireless Presenter System features the GLXD4+ tabletop receiver and BETA®98H/C flexible gooseneck mic for brass, woodwind, and percussion.

The GLX-D+ Dual Band Wireless Presenter System features the precision-crafted BETA®98H/C flexible gooseneck microphone for brass, woodwind and percussion applications and the GLXD4+ tabletop receiver. The perfect combination of the automatic frequency management with the new Dual Band Technology provides reliable and consistent performance, while Shure proprietary Lithium-Ion rechargeable batteries provide up to 12 hours of use. Go wireless without complication.

Shure GLXD14+/B98 Features

• Dual Band Wireless Technology
• Automatic Frequency Management
• Smart Rechargeability
• Up to 16 Compatible Systems

• GLXD1+ Bodypack Transmitter1
• GLXD4+ Digital Wireless Receiver1
• BETA98 Instrument Microphone1
• PS43 Power Supply1
• SB904 Lithium-Ion Rechargeable Battery1
• Black Carrying Case1

• Compatibility
  • With Frequency Manager: Up to 11 compatible systems in typical setting, and up to 16 under ideal conditions
  • Without Frequency Manager: Up to 4 compatible systems in typical setting, and up to 8 under ideal conditions
• System Operating Range
  • Indoors: Up to 30 m (100 ft.) typical, with a maximum of 60 m (200 ft.) under ideal conditions
  • Outdoors: Up to 20 m (65 ft.) typical, with a maximum of 50 m (165 ft.) under ideal conditions
• Transmit Mode Shure Proprietary Digital - Dual Band (2.4 GHz and 5.8 GHz)
• Audio Frequency Response 20 Hz – 20 kHz Note: Dependent on microphone type
• Dynamic Range 120 dB, A-weighted
• RF Sensitivity -88 dBm, typical
• Total Harmonic Distortion 0.07%, typical
• RF Output Power 10 mW E.I.R.P. max
• Operating Temperature Range -18°C (0°F) to 57°C (135°F) Note: Battery characteristics may limit this range.
• Storage Temperature Range -29°C (-20°F) to 74°C (165°F)
• PolarityPositive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 6,35 mm output.
• Battery Life Up to 12 hours
• GLXD1+ DUAL BAND BODYPACK TRANSMITTER
  • Dimensions (HxWxD) : 4.5x2.6x1.1” (115x66.94x28.51mm), without antenna
  • Weight: 5.4 oz (153.1g), without battery
  • Power Requirements: 3.7V Rechargeable Li-Ion
  • Housing Cast: Metal, Black Powdercoat
  • Input Impedance: 900 kΩ RF
  • Output Power: 10 mW E.I.R.P. max
  • TRANSMITTER INPUT
    • Connector: 4-Pin male mini connector (TA4M)
    • Configuration: Unbalanced
    • Maximum Input Level (1 kHz at 1% THD): +8.4 dBV (7.5 Vp-p)
    • Antenna Type: Dual Band Internal Monopole
    • Pin Assignments TA4M
      • 1: Ground (cable shield)
      • 2: + 5 V Bias
      • 3: Audio
      • 4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
• GLXD4+ DUAL BAND WIRELESS RECEIVER
  • Dimensions (HxWxD): 7.2x4.8x1.6" (182.8x121.97x40.3 mm), antennas folded
  • Weight : 10.9 oz (310g)
  • Housing : Molded Plastic
  • Power Requirements : 14.5V - 17V, 600mA
  • Spurious Rejection: >35 dB, typical
  • Gain Adjustment Range: -20 to 40 dB in 1 dB steps
  • Phantom Power Protection: Yes
  • Configuration
    • XLR Output: Impedance Balanced
    • 6.35 mm (1/4“) output: Impedance Balanced
  • Impedance
    • XLR Output: 100Ω
    • 6.35 mm (1/4“) output: 100Ω (50Ω, Unbalanced)
  • Maximum Audio Output Level
    • XLR connector (into 600 Ω load): 1dBV
    • 6.35 mm (1/4“) connector (into 3 kΩ load): +8.5 dBV
  • Pin Assignments
    • XLR Output: 1=ground, 2=hot, 3=cold
    • 6.35 mm (1/4“) connector: Tip=audio, Ring/Sleeve=ground
  • RECEIVER ANTENNA INPUT
    • Impedance 50Ω
    • Antenna Type Dual Band 1/2 Wave Sleeve Dipole, non-removable
    • Maximum Input Level −20 dBm
• Beta 98 Microphone
  • Cartridge Type: Electret Condenser
  • Frequency Response: 20 to 20,000 Hz
  • Polar Pattern: Cardioid
  • Output Impedance: 150Ω
  • Sensitivity (at 1 kHz, open circuit voltage): –56 dBV/Pa (1.6 mV) (1 Pascal=94 dB SPL)
  • Maximum SPL (1 kHz at 1% THD, 1KΩ load): 155 dB SPL
  • Equivalent Output Noise (A-weighted): 31 dB SPL (typical)
  • Dynamic Range (at 1 kHz, 1KΩ load)
    • 124 dB
    • 132 dB
  • Clipping Level (1 kHz at 0.25% THD, 1KΩ load): 3 dBV (1.4V)
  • Signal-to-Noise Ratio (Referenced at 94 DB SPL at 1 kHz): 63 dB
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  • Power Requirements: 11–52 VDC phantom power (IEC-61938), 1.2 mA