The DM2 TNT active inline mic preamp lets you choose between a moderate +15dB or explosive +30dB of gain with an ultra-high impedance input and eight load settings to perfectly match any passive microphone.
For optimum results, plug the DM2 directly into your microphone's output. If needed, a cable can be used between the microphone and the DM2: the shorter the cable the better the overall performance will be.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by a roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.
Whether you’re a podcaster, recording engineer, or running live sound, sE inline preamps are the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration.
sE Electronics DM2 Features
- Switchable, clean and consistent gain from moderate +15dB to explosive +30dB
- Designed for neutral, balanced sound quality with minimal noise
- 8 settings ranging from 50Ω to 10MΩ to match your preamp with any mic accurately
- Two gain levels for high flexibility on various sources
- Boosts signal independent from load impedance or cable length
- Enhance dynamic and passive ribbon microphones
- Explosive gain and precise control
- Precise control
- Sophisticated Class A electronics
- Gold plated XLR connector
- All-metal housing with premium finish
- Perfect for podcasting, recording, or live sound
- DM2 TNT active inline mic preamp1
- sE logo sticker1
- User manual with warranty card1
- System Requirements
- Input: passive microphone (ribbon/dynamic)
- Output: preamp/mixer/audio interface providing 48V phantom power
- Limitations: not suitable for phantom-powered microphones (condenser mics, active ribbon mics)
- Frequency Range10 Hz - 120,000 Hz (-0.3 dB)
- Gain15 dB / 30 dB
- Max Output Level (0.5% THD)9.5 dBV (3.0 V)
- Output Noise Level1 μV @ 15 dB / 6.6 μV @ 30 dB
- Powering48 Volts according to IEC 61938
- Electrical Impedance135 Ω
- Recommended Load Impedance>1kΩ
- Current Consumption3.1 mA
- Connectivity3-pin male/female XLR connector
- Dimensions0.75" diameter x 3.76" length
- Weight2.82 oz
