sE Electronics sE8 Small Diaphragm Cardioid Condenser Microphone

Fit for any challenges in the studio or on stage, the sE8 is a high-performance handcrafted small-diaphragm condenser that is small in stature, huge in sound.

Its new hand-made capsule implements a sophisticated backplate design that provides a perfectly balanced sound, so it's never harsh or aggressive - perfect for sources like hi-hats and drum overheads.

It's also one of the quietest small-capsule mics on the planet - and with the highest dynamic range and SPL handling in its class, along with attenuation pads and low-cut filters for superb flexibility, the sE8 is ready for any sounds you’re making, whether in the studio environment or demanding on-stage applications.

The sE8 is equipped with two switchable pre-attenuation pads and two switchable low-cut filters. The -10 dB and -20 dB pad switches provide extended dynamic range, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more. Selectable at either 80Hz or 160Hz, the two switchable low-cut filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques.

sE Electronics sE8 Features

• Small in stature, huge in sound
• Ultra-thin 3 micron gold-sputtered diaphragms for superior transients
• Capsule is handcrafted and tuned in the sE factory
• Ultra-precision electrode design optimized for superb linearity and natural sonics
• Backplate design provides smooth, natural sound and truly consistent off-axis response
• Avoids coloration in demanding applications
• Extremely low noise without the use of integrated circuits
• Transformerless design for excellent transparency and clarity
• 2 switchable pre-attenuation pads
• 2 switchable low-cut filters
• All-metal housing with gold-plated XLR connector

• sE8 small diaphragm cardioid condenser microphone1
• Mic clip (with thread adapter)1
• Wind screen1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Range20 Hz - 20 kHz
• Output Impedance110 ohms
• Sensitivity25 mV/Pa (-32 dBV)
• Max. SPL139 / 149 / 159 dBSPL (0/10/20 dB pad) (0.5% THD @ 1kHz)
• Equivalent Noise Level13 dB(A)
• Dynamic Range126 / 136 / 146 dB (0/10/20 dB Attentuation pad)
• Signal to Noise Ratio81 dB
• Low-Cut Filter80 / 160 Hz, 6 dB/Oct, switchable
• Attenuation Pad10 / 20 dB, switchable
• Powering48 Volts according to IEC 61938
• Current Consumption2.7 mA
• Connectivity3-pin male XLR connector
• Dimensions0.91" diameter x 4.72" length
• Weight4.97 oz