Ideal for vocals, the EW-DX 835-S SET from Sennheiser is a wireless handheld microphone system. This set includes two EW-DX SKM-S handheld transmitters, two MMD 835 cardioid dynamic microphone capsules, one EW-DX EM 2 two-channel rackmount receiver, and two BA 70 rechargeable batteries.
The handheld transmitters include built-in mute switches.
Sennheiser EW-DX 835-S SET Features
- This wireless microphone handheld system is great for performances and presentations of all kinds
- Programmable mute switch on EW-DX SKM-S lets you customize the device depending on your professional needs
- Function buttons control all the transmitter settings directly from handheld microphone
- Clear and easy focused user interface with OLED display enable at-a-glance settings monitoring
- Network enabled for control with Sennheiser Control Cockpit/media control system through a number of 3rd party modules
- 2 channel half rack (9.5’)
- Up to 88 MHz switching bandwidth
- PoE IEEE 802.3af Class 3
- Equidistant Channel Spacing: 146 channels in standard mode; 293 channels in Link Density Mode
- Ethernet connectivity (IPv4 and IPv6)
- Secure AES 256 encryption
- External PSU 12V/1A
- All-metal housing
- 10mW RF power with up to 100m/328ft working range
- Charging contacts for in-device charging with CHG 70N
- Persistent eInk display - parameters visible on screen even when device is not powered on
- Extended runtime with lithium-ion batteries - up to 12 hours operation time
- Standard capsule interface - compatible with a wide range of Sennheiser and Neumann capsules
- Mic input trim control
- EW-DX EM 2 rack receiver1
- EW-DX SKM-S handheld transmitter2
- MMD 835 microphone module2
- MZQ 1 microphone clamp2
- Rod antenna2
- Power supply with country adapters1
- GA 3 rackmount set1
- Rubber feet4
- BA 70 rechargeable battery pack2
- System
- Audio Link Frequency Ranges
- Q1-6: 470.2 - 526 MHz
- R1-6: 520 - 576 MHz
- V5-7: 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz
- Bluetooth® Low Energy (BLE) frequency range: 2402 - 2480 MHz
- Audio Frequency Response: 20 Hz - 20 kHz (-3 dB) @ 3 dBfs
- Audio THD: ≤ -60 dB for 1 kHz @ -3 dBfs input level
- Dynamic Range: 134 dB
- System Latency: 1.9 ms
- Operating Temperature: 14°F to 131°F (-10°C to 55°C)
- Relative Humidity: 5 - 95% (non-condensing)
- EW-DX EM 2 (Rack Receiver)
- Input Voltage: 11 - 13 V ⎓ or PoE IEEE 802.3af Class 0 (CAT5e or higher)
- Input Current: ≤ 1 A
- Transmit Power (radiated): BLE: max. 10 mW EIRP
- Audio Output Power: 18 dBu max
- Headphone Output: 2x 70 mW @ 32Ω
- Ethernet
- RJ-45 socket, IEEE802.3
- 100Base-TX (half+full duplex)
- 10Base-T (half+full duplex)
- (CAT5e or higher)
- Dimensions: 8.35" x 1.73" x 7.44"
- Weight: approx. 2.2 pounds (without antennas and power supply)
- EW-DX SKM-S (handheld transmitter)
- Input Voltage: 2.0 - 4.35 V
- Input Current: < 300 mA
- Power Supply: 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack
- Occupied Bandwidth: 200 kHz
- Transmit Power (radiated)
- Audio link: 10 mW ERP
- (Range Y1-3: 12 mW ERP)
- BLE: max. 10 mW EIRP
- Dimensions (ø x l): 1.97" x 10.55"
- Weight: 0.67 pounds
- MMD 835 (microphone module)
- Transducer Principle: dynamic
- Sensitivity: 2.1 mV/Pa
- Sound Pressure Level: 154 dB SPL
- Pick Up Pattern: cardioid
Available Configurations
- Q1-9: 470.2 - 550 MHz
- R1-9: 520 - 607.8 MHz
- V5-7: 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz
The EW-D EM
Compatible with EW-D handheld, bodypack, and table-stand transmitters, this two-channel, half-rack (9.5”) receiver features extended 88 MHz switching bandwidth, intermodulation-free operation for up to 293 channels with secure AES 256 encryption, and a redundant power supply via Power over Ethernet (PoE).The EW-D SKM-S
Boasting a rugged metal construction and enjoying up to 12 hours of runtime, EW-DX SKM is built to meet the challenges of live sound head-on. Other features include an easy-to-read E-Ink display and charging contacts for in-device charging.
The MMD 835
Experience state-of-the-art live sound with this favorite microphone capsule. Its cardioid pickup pattern rejects background noise from the sides and rear.
More about Sennheiser's EW-DX Wireless System
Delivering peak performance, EW-DX offers seamless product pairing and management that is reliable and intuitive. This wireless series builds on decades of research, utilizes refined technologies, and incorporates sophisticated tools to deliver a scalable digital UHF system.
Integrated and Enhanced Controls
Effortlessly take control and monitor your mic system from your mobile device with tools like Sennheiser’s Control Cockpit, Wireless Systems Manager (WSM), or Smart Assist app that provide a detailed system view in complex, networked environments.
Equidistant channel spacing, auto scan, and Bluetooth® Low Energy sync allow you to coordinate and set frequencies with the push of a button.
Auto Scan assigns channels so you can pack more channels more reliably, without risking intermodulation interference.
The equidistant frequency grid allocates more channels per available space.
Meanwhile, automatic RF setup allows for easy in-room multi-channel installations.
Reliable Audio In the Most Demanding Environments
EW-DX boasts a digital UHF transmission enhanced by a wide dynamic range and ultra-low latency that effortlessly keeps up with every detail of your sound.
Sennheiser’s proprietary SePac audio codec and innovative conversion technology sum up to deliver outstanding audio transparency along the entire signal chain, from the moment your sound is captured by a transmitter to the time it reaches your audience’s ears.
EW-DX’s Intelligent Switching Diversity digital system enables antenna switching between audio frames to deliver a stable connection without audible artifacts. In transmitters with a 134 dB dynamic range, no sensitivity settings are required.
Other features include in-device charging, 12-hour battery operation, and switching bandwidth up to 88 MHz.
Customize Your Audio Network
Dante® network audio, Ethernet control ports, and AES-256 encryption allow EW-DX to be securely transmitted and placed on IT networks.
Link Density Mode packs even more channels into a dedicated space while making the most of interchangeable series components across the Evolution Wireless Digital line.
