Shure Beta 87C Vocal Cardioid Condenser Microphone

Designed for performers using personal monitoring, the Beta 87C vocal cardioid mic from Shure delivers a smooth tailored response for a warm, natural studio-grade performance. Ideal for lead and backup vocals as well as spoken word, this mic is great for live performances on-stage as well as recording in the studio—whatever your venue, this professional-level microphone is the perfect choice for performers utilizing personal monitoring or looking to reduce ambient noise in their live mix.

The Beta 87C’s uniform cardioid pattern provides maximum sound isolation and minimum off-axis tone coloration, rejecting ambient sound from the rear of the microphone. A 3-stage pop filter minimizes breath noise and vocal pops. A controlled low-frequency roll-off compensates for proximity effect and prevents the “boomy” sound that can happen with close-up use.

The Beta 87C boasts a frequency response of 50 - 20,000 Hz. Performance characteristics prevail even at sound pressure levels as high as 139 dB SPL. Plus, the cartridge is shielded by a proven shock mount system to absorb mechanical shock and minimize handling noise.

This condenser mic is an excellent choice for any vocalist or speaker looking to reduce off-axis coloration and wanting to maintain a warm and natural sound for their event.

The Beta 87C is great for:

• Lead vocals
• Backup vocals
• Speech

Shure Beta 87C Features

• Smooth, wide frequency response, slight presence rise
• Uniform cardioid polar pattern for maximum isolation
• Minimum off-axis tone coloration
• Low-frequency roll-off compensates for proximity effect
• Three-stage pop filter minimizes breath pop and noise
• Break-resistant stand adapter

• Beta 87C vocal condenser microphone1
• Swivel adapter1
• Carrying bag1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response50 Hz - 16 kHz
• Output Impedance100 Ω
• Sensitivity (at 1kHz, open circuit voltage)−51 dBV/Pa (2 mV)
• Max. SPL (1kHz at 1% THD, 1kΩ load)139 dB
• Signal-to-Noise Ratio (referenced at 94 dB SPL at 1kHz)70.5 dB
• Dynamic Range (at 1kHz, 1kΩ load)117 dB
• Clipping Level (1kHz at 0.25% THD, 1kΩ load)-6dBV (0.5V)
• Self Noise (typical, equivalent SPL, A-weighted)22 dB typical
• Hum Pickup (typical, at 60Hz, equivalent SPL/mOe)-5dB
• Polaritypositive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
• Connector3-pin professional audio (XLR), male
• Power Requirements11 to 52 Vdc phantom (1.2 mA)
• Weight0.475 lbs

More about Shure Beta Microphones

The Shure Beta Microphone Series were made as an improvement to the SM Series, offering better performance and are the next step up in price for Shure product. In general, Shure Beta mics offer tighter pick-up patterns and allow for higher gain before feedback. These mics have upgraded pop filters and advanced shock mount systems compared to the SM mic line. Recognized for their superior construction, low handling noise, and high SPL levels, Beta Microphones redefine sensitivity and control for essential, expert sound reinforcement. Check out others in the Shure Beta series here.