The BLX14 Wireless Guitar System from Shure is comprised of a BLX1 Bodypack Transmitter, a BLX4 Single Channel Receiver, a WA302 Guitar Cable, a power supply, and two AA batteries.
Add versatility to your musical performance. With its simple setup and intuitive interface, the BLX14 offers untethered performance for guitar and bass players.
Shure BLX14 Features
- Guitar system includes a bodypack transmitter, single-channel receiver, guitar cable, power supply, and two AA batteries
- Untethered performance for guitar and bass players
- Simple setup and intuitive interface
- 14 hours of continuous use
- 300 feet (91 m) operating range (line of sight)
The BLX1 Bodypack Transmitter
The lightweight yet rugged build of the BLX1 means you don’t have to worry about damage during everyday use, and it easily clips onto a belt, pocket, or guitar strap for optimal placement. A TQG connection on this transmitter enables connection with lavalier, headset, earset, and instrument mics, as well as guitar cables. Turn the transmitter on and off and control your gain with controls on the bodypack itself. Its group and channel selection buttons enable quick frequency matching with the receiver.
The BLX4 Wireless Receiver
The BLX4 allows for mobility up to 300 feet away by line-of-sight. It can expand to up to 12 mic channels, making it a great choice to start and grow your sound system. Setup is quick and easy with QuickScan frequency selection, which also provides improved linearity and frequency response. The BLX4’s microprocessor-controlled internal antenna diversity reduces dropouts, while built-in 1/4" and XLR outputs enable connection to PA systems and mixing boards.
More about Shure's BLX Wireless System
Go wireless with confidence using this specially engineered system that gives you pristine audio clarity without noise interference or disappointing dropouts. BLX gives you the versatility and selection to pick and choose precisely the equipment to fit your needs whatever that venue or performance. Whether you’re a performer or presenter, BLX Wireless is the ideal choice for producing stellar, dependable sound.
- BLX1 Bodypack Transmitter1
- BLX4 Single Channel Receiver1
- WA302 Guitar Cable1
- PS24 Power Supply1
- AA Batteries2
- System
- Working Range: 91 m (300 ft) Line of Sight
- Audio Frequency Response: 50 to 15,000 Hz
- Total Harmonic Distortion Ref. ±33 kHz deviation with 1 kHz tone: 0.5%, typical
- Dynamic Range: 100 dB, A-weighted, typical
- Operating Temperature: -18°C (0°F) to 57°C (135°F)
- Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
- BLX1 Transmitter
- Audio Input Level
- max: -16 dBVmaximum
- min (0 dB): +10 dBVmaximum
- Gain Adjustment Range: 26 dB
- Input Impedance: 1 MΩ
- RF Transmitter Output: 10 mW, typical
- Dimensions: 4.33 in. X 2.52 in. X 0.83 in. (110 mm X 64 mm X 21 mm) H x W x D
- Weight: 2.6 oz. (75 g), without batteries
- Housing: Molded ABS
- Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
- Battery Life: up to 14 hours (alkaline)
- BLX4 Receiver
- Output Impedance
- XLR connector: 200 Ω
- 6.35 mm (1/4") connector: 50 Ω
- Audio Output Level Ref. ±33 kHz deviation with 1 kHz tone
- XLR connector: –27 dBV (into 100 kΩ load)
- 6.35 mm (1/4") connector: –13 dBV (into 100 kΩ load)
- RF Sensitivity: -105 dBm for 12 dB SINAD, typical
- Image Rejection: >50 dB, typical
- Dimensions (HxWxD) 1.57" x 7.4" x 4.06"
- Weight: 8.5 oz. (241 g)
- Housing: Molded ABS
- Power Requirements: 12–15 V DC @ 235 mA (BLX88, 320 mA), supplied by external power supply (tip positive)
