Shure MX150/C-XLR Condenser Lavalier Microphone

The Shure MX150/C Condenser Lavalier Microphoneprovides uncompromised sound quality and high reliability with minimal visibility. It features CommShield technology to stop RF interference, user-changeable equalization caps, and a windscreen for wind protection.

The MX150B provides uncompromised sound quality and high reliability with minimal visibility for use in television broadcasting, corporate lectures, A/V teleconferencing, House of Worship, and sound reinforcement.

Shure MX150/C Features

• CommShield® Technology guards against interference from cellular RF devices and digital bodypack transmitters
• Matte Black, sleek, low-profile design for inconspicuous placement
• Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimized handling noise
• Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
• Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
• Legendary Shure quality, ruggedness, and reliability

• MX150/C Condenser Lavalier Microphone1
• Multi-Position Tie Clip1
• Snap-fit Windscreen1
• Storage Pouch1
• RFI Resistant, Inline Preamp for all MX Models (Black)1

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response20 Hz - 20 kHz
• Output Impedance165.0 &Omega
• Sensitivity (open circuit voltage, @ 1 kHz, typical)–39.0 dBV/Pa[1] (11.0 mV)
• Maximum SPL (1 kHz at 1% THD[2])134.5 dB SPL 2500 Ωload; 129.5 dB SPL 1000 Ωload
• Signal-to-Noise Ratio[3]57.0 dB
• Dynamic Range (@1 kHz)97.5 dB SPL 2500 Ωload; 97.5 dB SPL 1000 Ωload
• Self Noise (equivalent SPL, A-weighted, typical)37.0 dB
• Clipping Level (1 kHz at 1% THD)1.0 dBV: –4.5 dBV
• Common Mode Rejection (20 to 20,000 Hz)>60 dB
• Power Requirements11–52V DC[4] phantom power (IEC-61938), <2.2 mA 
• Weight4.3 oz (121 g)
• Operating Temperature Range-18°C (0°F) to 57°C (135°F)
• Storage Temperature Range-29°C (-20°F) to 74°C (165°F)
• Notes
  • [1] 1 Pa=94 dB SPL
  • [2] THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
  • [3] S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
  • [4] All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.

More about Shure's Microflex Series

Communicate with confidence with the Microflex® complete digital conference system from Shure. Scalable at 2, 4, or 8 channel groupings (a maximum of 40, dependent on the region), this versatile system’s components include transceivers, an access point transceiver, networked charging stations, and an audio network interface—all with automatic frequency management and using shielded Cat 5e or Cat 6 cables for ease of installation and customization. This system is integrated with AES-256 encryption to keep your meetings secure.

From handheld, gooseneck, boundary, to bodypack (compatible for head-worn or lavalier), the wide variety of transmitters in the Microflex Wireless series allow you to choose what best fits your collaborative style. Each option boasts Commshield technology for RF noise immunity—so you can hear the person speaking into their mic with crystal clarity without distractions. Powered by rechargeable lithium-ion batteries, Microflex transmitters enable you to maintain your meeting’s momentum for up to 8 hours of continuous runtime.

No matter the size of your space, Microflex Wireless is the ideal conference system for any meeting environment, including flexible/divisible meeting rooms, boardrooms, courtrooms, lecture halls, conferences—even remote management and campus-wide installations. Portable, flush-mount and modular units ensure maximum coverage while freeing you up from the worry of wired components.