The Shure SCM262 Stereo Microphone Mixer incorporates 2 active-balanced mic inputs with 3 unbalanced stereo aux level inputs for use in sound reinforcement.
The SCM262 Stereo Microphone Mixer from Shure gives you just the right amount of control over your sound in a dependable build that’s characterized by its simplicity and user-friendliness. The SCM262 is the perfect mic mixer choice for applications that are smaller-scale and don’t need a lot of bells and whistles—just good quality and basic functions. This makes it ideal for a wide range of sound reinforcement applications such as in restaurants, classrooms, corporate training sessions, and health clubs.
Get connected in a way that works best for your sound setup. The SCM262 is a stereo microphone mixer that incorporates 2 active-balanced microphone inputs (one active balanced XLR mix input channel and one active balanced XLR mic and a ¼-inch TRS line input channel) with 3 unbalanced stereo aux level inputs (6 phono connectors), 1 unbalanced stereo output (2 phono connectors), and 1 balanced stereo mic/line output (2 ¼-inch TRS connectors).
For all its bare-bones simplicity, the SCM262 delivers the exact functionality you need, including tone controls, 12 V phantom power for condenser microphones, internal power, defeatable “ducking,” and a “jukebox mute” function. These features give you just the right amount of tools without bogging you down in settings you don’t need, so you can focus your energy on the project itself and not the technology.
The latest addition to Shure’s growing Installed Sound gear line, the SCM262 delivers epic performance, reliable durability, and great bang-for-your-buck. This mixer boasts the perfect blend of features, benefits, and ease of use, all in an affordable half-rack chassis that’s easy to integrate into any size of audio setup.
More about the SCM Series from Shure
Shure mixers are built on over a generation of experience and expertise. They are specifically designed and precision-engineered to provide installed sound applications unparalleled confidence in performance. The SCM Series of mixers continues this Shure standard with an emphasis on combining quality with affordability.
Shure SCM262 Features
- Defeatable "ducking"
- "Jukebox mute"
- One active balanced XLR mic input channel
- One active balanced XLR mic and ¼ inch TRS line input channel
- Three stereo input channels (Six phono connectors)
- One unbalanced stereo output (Two phono connectors)
- One balanced stereo mic/line output (Two ¼ inch TRS connectors)
- 12V phantom power for condenser microphones
- All in a half-rack chassis
- SCM262 Stereo Microphone Mixer1
- Frequency Response (at 1 kHz)
- Mic/Line Switch 150 Hz to 20 kHz ±2 dB
- Aux Input 20 Hz to 20 kHz ±2 dB
- Low-Cut Filter-6 dB/octave below 80 Hz
- Total Harmonic Distortion
- 1 kHz, +4 dBu out, mix output (MASTER) at +0 dB
- <0.25%
- Equivalent Input Noise (150Ω balanced source, A-Weighted) -128 dBV
- Output Noise (channel controls full counterclockwise, A-Weighted)
- Master full counterclockwise -95 dBV
- Master full clockwise -59 dBV
- Common Mode Rejection>70 dB, at 1 kHz
- PolarityAll inputs to all outputs are non-inverting
- Overload and Shorting ProtectionShorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals up to +10 dBV; Line and Aux inputs by signals up to +28 dBV
- Equalization
- Bass (Low-frequency shelving, corner frequency at 250 Hz) ±6 dB
- Treble (High-frequency shelving, corner frequency at 4 kHz) ±6 dB
- Ducking
- Mic channels 1 and 2 levels -20 dB or -∞ dB
- Activation time 10 ms, typical
- Mic Deactivation time 2 seconds, typical
- Jukebox Mute Deactivation Time 30 seconds, typical
- Phantom Power12 Vdc open-circuit through 680 Ω resistors
- Operating Voltage
- SCM262: 100–200 V AC, 50/60 Hz, 60 mA
- SCM262E: 220–240 V AC, 50/60 Hz, 30 mA
- Temperature Range
- Operating Temperature 20° –95°F (-7° – 35°C)
- Storage Temperature -20° –165°F (-29° – 74°C)
- Dimensions1.72x8.6x6.37" (43x218x162 mm)
- Net Weight2 lbs, 5 oz (1.1 kg)
