Shure SLXD14/93 Wireless Lavalier Microphone System

Ideal for presenters, worship leaders, and live performers, the SLXD14/93 Wireless Lavalier Microphone System is designed to deliver versatility and user-friendliness. This system boasts stable, efficient signals, combined with powerful audio and a discreet presentation. Using its built-in guide, setup of this system is fast and easy.

Achieve an immersive experience for your audience with the SLXD14/93 System's wireless mic’s omnidirectional design. Paired with a wireless bodypack transmitter, you can get reliable, clean connectivity to your receiver up to 328 feet away (within line of sight).

Shure SLXD14/93 Features

• Transparent, 24-bit digital audio
• Solid RF performance
• Ideal for a wide range of applications, from day-long presentations to nighttime performances
• Operate up to 32 compatible systems per 44 MHz band
• Easy setup

• SLXD4 Single-Channel Receiver1
• SLXD1 Bodypack Transmitter1
• WL93 Miniature Lavalier Microphone1
• AA Batteries2
• Antennas2
• Power Supply1
• User Guide1

• System
  • RF Carrier Frequency Range: 470–937.5 MHz, varies by region (See Frequency Range and Output Power table)
  • Working Range: 100 m ( 328 ft)
  • RF Tuning Step Size: 25 kHz, varies by region
  • Image Rejection: >70 dB, typical
  • RF Sensitivity: −97 dBm (at 10 BER)
• Audio
  • Latency: 3.2 ms
  • Audio Frequency Response: 20 Hz– 20 kHz (+1, ­2 dB)
  • Audio Dynamic Range: 118 dB (at 1% THD, A-weighted, typical
  • Total Harmonic Distortion: <0.02%
  • System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.
  • Mic Offset Range: 0 to 21 dB (in 3 dB steps)
• Temperature Range
  • Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
  • Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
• SLXD1
  • Battery Type: Rechargeable Li-Ion or 1.5V AA batteries
  • Dimensions (HxWxD): 3.86x2.68x1" (98x68x25.5mm)
  • Weight: 89 g
  • Housing: PC/ABS
  • Audio Input
  • Connector: 4-Pin male mini connector (TA4M)
  • Impedance: 1 MΩ
  • Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
  • Preamplifier Equivalent Input Noise (EIN): ­118 dBV
  • RF Output
  • Antenna Type: 1/4 wave
  • Occupied Bandwidth: <200 kHz
  • Modulation Type: Shure proprietary digital
  • Power: 1 mW or 10 mW
• SLXD4
  • Dimensions (HxWxD): 42x197x152mm (1.65x7.76x5.98")
  • Weight: 816g, without antennas
  • Housing: Galvanized Steel
  • Power Requirements: 15 V DC @ 600 mA, supplied by external power supply (tip positive)
  • RF Input
    • 1/4" (6.35 mm): Yes
    • XLR: Yes
  • Spurious Rejection: >75 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Phantom Power Protection
  • Audio Output
    • 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
    • XLR: Balanced (1=ground, 2=audio +, 3=audio −)
    • 1/4" (6.35 mm): 1.3 kΩ (670 ΩUnbalanced)
    • XLR (line): 400 Ω (200 ΩUnbalanced)
    • XLR (mic): 150 Ω
    • 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
    • XLR: LINE setting= +15 dBV, MIC setting= ­15 dBV
  • Gain Adjustment Range: ­18 to +42 dB in 1 dB steps
  • Configuration
  • Impedance
  • Full Scale Output
  • Mic/Line Switch: 30 dB pad
  • Networking
  • Network Interface: Single Port Ethernet 10/100 Mbps
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100m (328 ft)

SLXD1 Digital Wireless Bodypack Transmitter

Be confident with your sound, whether you’re presenting in a lecture hall or performing live on-stage. Featuring industry-leading digital wireless technology and design, the SLXD1 Digital Wireless Bodypack Transmitter from Shure easily syncs with a wireless receiver. Choose from an instrument cable or lavalier, headworn, or instrument microphone to complete your setup.

WL93 Miniature Lavalier Microphone

Connect your wireless bodypack transmitter to the WL93. This omnidirectional miniature lavalier microphone provides full, clear sound in speech applications. It features a smooth, tailored frequency response, controlled low-frequency roll-off, and a visually-discreet design that makes it easy to incorporate into body-worn mic applications including broadcasting, public speaking, theatrical performances, and other sound reinforcement projects.

SLXD4 Digital Wireless Receiver

Experience the freedom of wireless performance with the SLXD4 Digital Wireless Receiver from Shure. From lecture-hall presentations to worship services to musical concerts, the SLXD4 is the perfect choice for confident, reliable wireless audio, syncing easily to your choice of wireless transmitters. This receiver boasts a rugged, all-metal construction that makes it a durable choice for day-long presentations or all-night performances. Its half-rack size makes it easy to integrate into any preexisting sound setup.

More about the SLXD Series from Shure

Achieve clear, reliable wireless audio with the SLX Digital series from Shure. This install-friendly line of wireless audio gear is ideal for a wide range of applications, from lecture halls to houses of worship to performance venues of all shapes and sizes. Boasting compatibility with Shure’s UHF wireless antenna distribution and remote antenna accessories, as well as offering a wide selection of single half-rack and dual full-rack receiver options, handheld and bodypack transmitters, and your choice of vocal, lavalier, headset, and instrument microphone system configuration—SLXD offers the versatility and functionality you need, no matter what your project.

SLXD maintains stable signals with high efficiency, letting you achieve transparent, 24-bit digital audio and rock-solid, reliable RF performance. This series delivers crystal-clear digital audio quality with >120 dB dynamic range. Enjoy up to 8 hours of continuous operation using two AA batteries (included) or the optional Shure SB903 Li-ion rechargeable batteries and charging accessories (sold separately). The rack hardware necessary for permanent installation in your setup is also included.

With RF scan and IR sync or the receivers’ integrated frequency setup tool, this wireless system is easy to get started at the push of a button. You can link multiple systems locally via Ethernet to manage setup, group frequency scans, and firmware updates. SLXD also is compatible with Wireless Workbench® software and the ShurePlus™ Channels mobile app, giving you the tool for critical oversight and real-time production control.