Build a customized wireless audio setup with the SLXD14D Dual Wireless Bodypack System from Shure.
Shure SLXD14D Features
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- SLXD4D dual-channel receiver1
- SLXD1 bodypack transmitters2
- Antenna and rackmount set1
- AA batteries4
- System
- RF Carrier Frequency Range: 470–937.5 MHz, varies by region (See Frequency Range and Output Power table)
- Working Range: 100 m ( 328 ft)
- RF Tuning Step Size: 25 kHz, varies by region
- Image Rejection: >70 dB, typical
- RF Sensitivity: −97 dBm (at 10 BER)
- Audio
- Latency: 3.2 ms
- Audio Frequency Response: 20 Hz– 20 kHz (+1, 2 dB)
- Audio Dynamic Range: 118 dB (at 1% THD, A-weighted, typical
- Total Harmonic Distortion: <0.02%
- System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (with respect to the ring of the 6.35 mm output) output.
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- Temperature Range
- Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
- Storage Temperature Range: -29°C (-20°F) to 74°C (165°F)
- SLXD1
- Battery Type: Rechargeable Li-Ion or 1.5V AA batteries
- Dimensions (HxWxD): 3.86x2.68x1" (98x68x25.5mm)
- Weight: 89 g
- Housing: PC/ABS
- Audio Input
- Connector: 4-Pin male mini connector (TA4M)
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.2Vpp)
- Preamplifier Equivalent Input Noise (EIN): 118 dBV
- RF Output
- Antenna Type: 1/4 wave
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure proprietary digital
- Power: 1 mW or 10 mW
- SLXD4
- Dimensions (HxWxD): 1.65x7.76x5.98" (42x197x152mm)
- Weight: 816 g, without antennas
- Housing: Galvanized Steel
- Power Requirements: 15 V DC @ 600 mA, supplied by external power supply (tip positive)
- RF Input
- Spurious Rejection: >75 dB, typical
- Connector Type: BNC
- Impedance: 50 Ω
- Phantom Power Protection
- 1/4" (6.35 mm): Yes
- XLR: Yes
- Audio Output
- Gain Adjustment Range: 18 to +42 dB in 1 dB steps
- Configuration
- 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground )
- XLR: Balanced (1=ground, 2=audio +, 3=audio −)
- Impedance
- 1/4" (6.35 mm): 1.3 kΩ (670 ΩUnbalanced)
- XLR (line): 400 Ω (200 ΩUnbalanced)
- XLR (mic): 150 Ω
- Full Scale Output
- 1/4" (6.35 mm): +15 dBV differentially (+9 dBV single)
- XLR: LINE setting= +15 dBV, MIC setting= 15 dBV
- Mic/Line Switch: 30 dB pad
- Networking
- Network Interface: Single Port Ethernet 10/100 Mbps
- Network Addressing Capability: DHCP or Manual IP address
- Maximum Cable Length: 100m (328 ft)
SLXD1 Digital Wireless Bodypack Transmitter
Be confident with your sound, whether you’re presenting in a lecture hall or performing live on-stage. Featuring industry-leading digital wireless technology and design, the SLXD1 easily syncs with a wireless receiver. Choose from an instrument cable or lavalier, headworn, or instrument microphone to complete your setup.
SLXD4 Digital Wireless Receiver
Experience the freedom of wireless performance with the SLXD4. From lecture-hall presentations to worship services to musical concerts, the SLXD4 is the perfect choice for confident, reliable wireless audio, syncing easily to your choice of wireless transmitters. This receiver boasts a rugged, all-metal construction that makes it a durable choice for day-long presentations or all-night performances. Its half-rack size makes it easy to integrate into any preexisting sound setup.
More about the SLXD Series from Shure
Achieve clear, reliable wireless audio with the SLX Digital series from Shure. This install-friendly line of wireless audio gear is ideal for a wide range of applications, from lecture halls to houses of worship to performance venues of all shapes and sizes. Boasting compatibility with Shure’s UHF wireless antenna distribution and remote antenna accessories, as well as offering a wide selection of single half-rack and dual full-rack receiver options, handheld and bodypack transmitters, and your choice of vocal, lavalier, headset, and instrument microphone system configuration—SLXD offers the versatility and functionality you need, no matter what your project.
SLXD maintains stable signals with high efficiency, letting you achieve transparent, 24-bit digital audio and rock-solid, reliable RF performance. This series delivers crystal-clear digital audio quality with >120 dB dynamic range. Enjoy up to 8 hours of continuous operation using two AA batteries (included) or the optional Shure SB903 Li-ion rechargeable batteries and charging accessories (sold separately). The rack hardware necessary for permanent installation in your setup is also included.
With RF scan and IR sync or the receivers’ integrated frequency setup tool, this wireless system is easy to get started at the push of a button. You can link multiple systems locally via Ethernet to manage setup, group frequency scans, and firmware updates. SLXD also is compatible with Wireless Workbench® software and the ShurePlus™ Channels mobile app, giving you the tool for critical oversight and real-time production control.
