The SLXD35 Portable digital wireless plug-on system delivers transparent, 24-bit digital audio and rock- solid RF performance for videographers, ENG and field production, film and location sound applications. Operate up to 32 compatible systems per 44 MHz band, with easy setup and optional rechargeability accessories. The SLXD3 features a patented lock ring mechanism for secure-wobble free connection of any XLR source, including dynamic and condenser microphones. Includes SLXD3 plug-on wireless transmitter, SLXD5 single-channel portable receiver, zippered carrying pouch, non-conductive cold shoe adapter, leather pouch with integrated belt clip and two pairs of AA alkaline batteries.
More about the SLXD Series from Shure
Achieve clear, reliable wireless audio with the SLX Digital series from Shure. This install-friendly line of wireless audio gear is ideal for a wide range of applications, from lecture halls to houses of worship to performance venues of all shapes and sizes. Boasting compatibility with Shure’s UHF wireless antenna distribution and remote antenna accessories, as well as offering a wide selection of single half-rack and dual full-rack receiver options, handheld and bodypack transmitters, and your choice of vocal, lavalier, headset, and instrument microphone system configuration—SLXD offers the versatility and functionality you need, no matter what your project.
SLXD maintains stable signals with high efficiency, letting you achieve transparent, 24-bit digital audio and rock-solid, reliable RF performance. This series delivers crystal-clear digital audio quality with >120 dB dynamic range. Enjoy up to 8 hours of continuous operation using two AA batteries (included with transmitter) or the optional Shure SB903 Li-ion rechargeable batteries and charging accessories (sold separately). The rack hardware necessary for permanent installation in your setup is also included.
With RF scan and IR sync or the receivers’ integrated frequency setup tool, this wireless system is easy to get started at the push of a button. You can link multiple systems locally via Ethernet to manage setup, group frequency scans, and firmware updates. SLXD also is compatible with Wireless Workbench® software and the ShurePlus™ Channels mobile app, giving you the tool for critical oversight and real-time production control.
Shure SLXD35 System Features
- Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use
- Dual 1/8” outputs including a headphone monitor out and switchable line/mic output
- Use Multi-Mic Mode to scan and sync over IR multiple clean frequencies, and monitor multiple sources from a single receiver with user-configurable front-panel controls
- Bright OLED display screen for key system function readouts and remaining battery life on transmitter and receiver
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 118 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over scan and IR sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Rugged metal construction of portable receiver and handheld transmitter
- SLXD3 plug-on wireless transmitter1
- SLXD5 single-channel portable receiver1
- Zippered carrying pouch1
- Non-conductive cold shoe adapter1
- Leather pouch with integrated belt clip 1
- AA alkaline batteries4
- System
- RF
- RF Carrier Frequency Range: 470–937.5 MHz (Varies by Region. See Frequency Range and Output Power Table.)
- Working Range: 100 m (328 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
- RF Tuning Step Size
- JB Band: 125 kHz
- All Other Bands: 25 kHz
- Varies by region.
- Image Rejection: >70 dB (typical)
- RF Sensitivity: −97 dBm at 10-5 BER
- AUDIO
- Latency: 3.2 ms
- High-Pass/Low Cut Filter: 150 Hz, –12 dB/octave (Note: factory default is for the HPF to be off)
- Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB)
- Audio Dynamic Range (A-weighted, 20 Hz–20 kHz, typical): 118 dB (@1% THD)
- Total Harmonic Distortion: <0.02%
- System Audio Polarity
- XLR: Positive pressure on microphone diaphragm produces positive voltage on pin
- 2 with respect to pin 3 of XLR output.
- TRS: Postive pressure on microphone diaphragm produces positive voltage on the tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- TEMPERATURE RANGE (Note: Battery characteristics may limit this range.)
- Operating Temperature Range: 0°F to 122°F (−18°C to 50°C)
- Storage Temperature Range: −20°F to 165°F (−29°C to 74°C)
- NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power levels for wireless microphone products.
- RF
- SLXD3
- Battery Type Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (Dia. × L): 4.9×1.6×1.6” (126× 41×41 mm)
- Weight: 7 oz. (200 g)
- Housing: Aluminum, Zinc Alloy, PC/ABS
- AUDIO INPUT
- Configuration: XLR
- Maximum Input Level (1 kHz @ 1% THD)
- Pad -12 dB: 20.5 dBV
- 0 dB: 8.5 dBV
- Boost +12 dB: -3.5 dBV
- Note: Dependent on Microphone Type
- Phantom Power
- +48V (7 mA maximum)
- +12V (15 mA maximum)
- RF OUTPUT
- Antenna Type: Dipole
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Proprietary Digital
- Power: 1 mW/10 mW/30 mW
- Varies by region. See Frequency Range and Output Power Table.
- Specific Absorption Rate (SAR): <0.17 W/kg
- SLXD5
- Dimensions (H×W×D): 4.21×2.68×1” (107×68×25.3 mm)
- Weight: 1.8 lb (182 g)
- Housing: Aluminum
- Power Requirements Battery: Rechargeable Li-Ion or 1.5 V AA batteries
- Power Supply: SBC-DC-903 Battery Eliminator, or 5 VDC via USB-C
- RF INPUT
- Spurious Rejection: >75 dB (Typical)
- Impedance: 50Ω
- Phantom Power Protection: Yes
- Antenna Type: 1/4 Wave Whip
- AUDIO OUTPUT
- Audio Frequency Response: 20 Hz – 20 kHz (+1, -3 dB)
- Connector Type: 1/8" (3.5 mm), ×2
- Configuration
- Balanced (Mono): Tip=audio +, Ring=audio –, Sleeve=ground
- Dual Mono: Tip = left, Ring = Right, Sleeve = Ground
- Impedance (Camera)
- Balanced (Mono) Line: 450Ω
- Balanced (Mono) Mic: 240Ω
- Dual Mono Line: 400Ω
- Dual Mono Mic: 200Ω
- Full Scale Output Camera (Balanced Line): 15 dBV
- Headphone: 13 mW @ 64Ω Load
