The SLXD4QDAN+ is a quad channel digital receiver for use with SLX-D transmitters. With the crystal-clear audio and rock-steady RF that SLX-D provides, the SLXD4QDAN+ features a wide 138 MHz tuning range and easily pair with SLX-D bodypack, handheld and plug-on transmitters. Use audio output summing to set and manage wireless output levels and use RF cascading to quickly scale up compact and powerful multi-channel wireless systems with Dante Digital Audio connectivity for use in every application. SLXDQ4DAN+ Quad Channel receivers – four channels of wireless versatility, wherever required.
- Four channels in one rack space
- Wide 138 MHz tuning range
- 32 available channels per frequency band (region dependent)
- Transparent 24-bit digital audio
- 118 dB dynamic range
- Audio Summing matches receiver output to available mixer channels (4,3,2 or 1)
- 4 XLR and 4 1/4" outputs and 2 local ethernet connections
- Dante Audio Networking, carried on single Ethernet cable
- RF Cascade creates an 8-channel system by linking two SLXD4Q+ together, no other accessories required
- Bias Voltage power supply management
- Digital predictive switching diversity
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Rugged metal construction
- RF Carrier Frequency Range 470–937.5 MHz, varies by region (See Frequency Range and Output Power table)
- Working Range 100 m (328 ft) (Note: Actual range depends on RF signal absorption, reflection and interference.)
-
RF Tuning Step Size
- 25 kHz, varies by region
- JB band: 125 kHz
- Image Rejection >85 dB, typical
- RF Sensitivity −97 dBm at 10-5 BER
- Latency 3.2 ms
- High-Pass / Low Cut Filter 150 Hz @ -12 db/oct (Note: Factory default is for the HPF to be off)
- Audio Dynamic Range 118 dB at 1% THD, A-weighted, typical
- Total Harmonic Distortion <0.02%
- System Audio Polarity Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output and the tip of the 6.35 mm (¼ inch) with respect to the ring of the 6.35 mm output.
- Mic Offset Range 0 to 21 dB (in 3 dB steps)
- Dimensions 1.65 x 15.47 x 5.98 in.
- Weight 1750 g (without antennas)
- Housing Galvanized Steel
- Power Requirements 15 VDC @ 1.03 A
- Spurious Rejection >75 dB (Typical)
- SLXD4QDAN+ receiver 1
- Rack mounting hardware 1
- ¼-wave antennas 2
- PS60 power supply 1
- Ethernet cable 1
What’s in the Box?
SAME DAY SHIPPINGon in stock items
EXPERT ADVICEfrom knowledgeable Account Managers
EASY PAYMENTSwith financing available from Affirm
FREE SHIPPINGon orders over $100
GEAR YOU NEEDfrom 400+ Brands
