The SLXD5 Single-Channel Portable Digital Wireless Receiver from Shure packs the rich features of an SLXD Digital Wireless Receiver into a slim, portable package. Featuring pristine 24-bit digital audio clarity, efficient long-range UHF transmission and easy-to-use setup features, the SLXD5 is at home on top of your camera or in an audio bag. Scan and deploy frequencies to a compatible SLXD wireless transmitter with IR sync, or coordinate and monitor large channel configurations with many sources using Multi-Mic Mode. A full suite of optional rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD5 Portable Receiver, a pair of AA alkaline batteries, a non-conductive cold shoe mount adapter and a zippered carrying pouch.
Shure SLXD5 Features
- Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 118 dB dynamic range
- Dual 1/8” outputs including a headphone monitor out and switchable line/mic output
- Use Multi-Mic Mode to scan and sync over IR multiple clean frequencies, and monitor multiple sources from a single receiver with user-configurable front-panel controls
- Bright OLED display screen for key system function readouts and remaining battery life
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Rugged metal construction
- SLXD5 Single-Channel Portable Digital Wireless Receiver1
- AA alkaline batteries2
- Non-conductive cold shoe mount adapter1
- Zippered carrying pouch1
- Dimensions (H×W×D)4.21×2.68×1" (107×68×25.3 mm)
- Weight 1.8 lb (182 g)
- Housing Aluminum
- Power Requirements Battery: Rechargeable Li-Ion or 1.5 V AA batteries
- Power SupplySBC-DC-903 Battery Eliminator, or 5 VDC via USB-C
- RF INPUT
- Spurious Rejection: >75 dB Typical
- Impedance: 50Ω
- Phantom Power Protection: Yes
- Antenna Type: 1/4 Wave Whip
- AUDIO OUTPUT
- Audio Frequency Response: 20 Hz – 20 kHz (+1, -3 dB)
- Connector Type: 1/8" (3.5 mm), ×2
- Configuration
- Balanced (Mono): Tip=audio +, Ring=audio –, Sleeve=ground
- Dual Mono: Tip = left, Ring = Right, Sleeve = Ground
- Impedance (Camera)
- Balanced (Mono) Line: 450Ω
- Balanced (Mono) Mic: 240Ω
- Dual Mono Line: 400Ω
- Dual Mono Mic: 200Ω
- Full Scale Output Camera (Balanced Line): 15 dBV
- Headphone: 13 mW @ 64Ω Load
More about Shure's SLXD Wireless Series
Achieve clear, reliable wireless audio with the SLX Digital series from Shure. This install-friendly line of wireless audio gear is ideal for a wide range of applications, from lecture halls to houses of worship to performance venues of all shapes and sizes. Boasting compatibility with Shure’s UHF wireless antenna distribution and remote antenna accessories, as well as offering a wide selection of single half-rack and dual full-rack receiver options, handheld and bodypack transmitters, and your choice of vocal, lavalier, headset, and instrument microphone system configuration—SLXD offers the versatility and functionality you need, no matter what your project.
SLXD maintains stable signals with high efficiency, letting you achieve transparent, 24-bit digital audio and rock-solid, reliable RF performance. This series delivers crystal-clear digital audio quality with >120 dB dynamic range. Enjoy up to 8 hours of continuous operation using two AA batteries (included) or the optional Shure SB903 Li-ion rechargeable batteries and charging accessories (sold separately). The rack hardware necessary for permanent installation in your setup is also included.
With RF scan and IR sync or the receivers’ integrated frequency setup tool, this wireless system is easy to get started at the push of a button. You can link multiple systems locally via Ethernet to manage setup, group frequency scans, and firmware updates. SLXD also is compatible with Wireless Workbench® software and the ShurePlus™ Channels mobile app, giving you the tool for critical oversight and real-time production control.
