SoundTube HP1290i 12-Inch Pendant Speaker

The HP1290i from SoundTube is a 12-Inch Pendant Speaker.

Patented BroadBeam Ring™ waveguide technology delivers a consistent dispersion pattern for maximum coverage area per speaker. One 12 inch treated fiber cone with a cloth surround concentrically mounted to a 1.375 inch mylar compression driver with waveguide. High-SPL, high-efficiency system for the sound reinforcement and PA markets. An impressive 2 cubic foot, ported ZeroReflection™ enclosure for added bass response, rigidity and optimal sound reproduction. Easy-access five-position tap switch with 25-, 70.7-, 100-volt and transformer bypass position. High efficiency for reduced amplification costs and max output for distributed or 8 ohm systems. Low insertion loss 150-watt transformer. UL 1480 (UEAY) and 2239 (hanging hardware) approved. Included accessories: impact-resistant steel grille, hanging hardware, Euroblock connector, terminal weather boot.

SoundTube HP1290i Features

• Consistent dispersion pattern (2-10 kHz)
• High SPL, high-efficiency system for sound reinforcement and PA use
• Safe for indoor or outdoor use
• 2 cubic foot, ported ZeroReflection™ enclosure for added bass response, rigidity and optimal sound reproduction
• Easy-access, five-position tap switch for 25, 70.7, and 100 V applications with transformer bypass position
• Low insertion loss 150 W transformer

• HP1290i 12" coaxial high SPL pendant speaker1
• Euroblock1
• Hanging hardware1
• Safety cable1
• Terminal weather boot1

• Source Inputs4 Pin 5.08mm Euroblock
• Coverage Angle85° (±6dB @ 2kHz)
• Crossover Frequency2.2 kHz
• Frequency Response
  • ±10 dB: 59 Hz - 22,000 Hz
  • ±3 dB: 77 Hz - 19,000 Hz
• Max Continuous Power RMS150 W
• Max Program Power300 W
• Nominal Impedance8 Ω
• Low Frequency Voice Coil2"
• Tweeter Driver1.375" Mylar Compression Driver w/ Waveguide
• Woofer Driver12" Treated Fiber Cone w/ Treated Cloth Surround
• Sensitivity96 dB
• Tap Selectorrotary switch
• Transformer Taps (25V/70V/100V)19W/150W/150W
• Grille Propertiessteel, powder-coated
• Enclosure PropertiesABS Glass Fiber Reinforced, Injection Molded, Ported
• Enclosure Volume3500 cu in
• Height22.8"
• Width20.8"