The HP890i from SoundTube is an 8-Inch Pendant Speaker.
Patented BroadBeam Ring™ waveguide technology delivers a consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage. One 8 inch treated fiber woofer and one 1.42 inch compression driver (1.0 inch exit) mounted to a proprietary cast-aluminum baffle and heat sink. High output and 120-watt transformer for the sound reinforcement and PA markets. Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity. Easy-access five-position selectable tap switch for 25-, 70.7- and 100-volt applications with transformer bypass position. Includes hanging hardware with galvanized steel cables and integrated SpeedClamp™ self-locking wire grip for fast, easy and secure installation. Also includes Euroblock connector and terminal weather boot. Average sensitivity of 94.0 dB offers high output capabilities and reduced amplification costs. UL 1480 (UEAY) and 2239 (hanging cable) approved.
SoundTube HP890i Features
- Consistent dispersion pattern for maximum intelligibility and edge-to-edge coverage
- One 8” (203 mm) treated fiber woofer and one 1.42” (36 mm) compression driver (1” exit)
- Safe for indoor or outdoor use
- Ideal for sound reinforcement and PA markets
- Patented ZeroReflection™ enclosure technology for optimal sound reproduction and cabinet rigidity
- Easy-access, five-position selectable tap switch
- High output capabilities and reduced amplification costs
- HP890i 8" coaxial high SPL pendant speaker1
- Euroblock1
- Hanging hardware1
- Safety cable1
- Terminal weather boot1
- Source Inputs4 Pin 5.08mm Euroblock
- Coverage Angle (±6dB @ 2kHz)85°
- Crossover Frequency2.5 kHz
- Frequency Response
- ±10 dB: 65 Hz - 22,000 Hz
- ±3 dB: 93 Hz - 22,000 Hz
- Low Pass Crossover12 dB per octave 2nd order
- Max Continuous Power RMS125W
- Max Program Power250W
- Network Type High Pass12 dB per octave 2nd order
- Nominal Impedance8 Ω
- Low Frequency Voice Coil1.34"
- Tweeter Driver1.38" titanium compression driver w/ waveguide
- Woofer Driver8" treated fiber
- Tap Selectorrotary switch
- Transformer Options25 / 70.7 / 100 V, 8 Ohm direct
- Transformer Taps (25V/70.0V/100V)15W/120W/120W
- Grille Propertiespowder-coated steel
- Enclosure PropertiesABS glass fiber reinforced, injection molded, ported
- Enclosure Volume12883. cu in
- Height17.23"
- Width/Diameter14.82"
