The MC850-CV-D 8-Channel Dante/AES67 Amplifier offers networked audio inputs, Ethernet configuration, control and reporting, and flexible power allocation. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
Stewart Audio MC850-CV-D Features
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 100W per channel
- Compact 1RU enclosure
- Made in USA
- MC850-CV-D 8-Channel Dante / AES67 Amplifier1
- Three Year Warranty1
- Output Power50W x 8 @ 70.7V/100V (selectable); All models: channel-by-channel power allocation
- Frequency Response (+0, -3dB)20 Hz—20 kHz 4/8 Ohms, 100 Hz—20 kHz 70.7V/100V
- THD+N <0.1% @ rated output power, all frequencies
- Signal-to-Noise Ratio>95dB
- Channel-to-Channel Isolation (Crosstalk)>95dB
- Audio Sampling Rates44.1, 48, 88.2, 96, 176.4, 192 ksps
- Power Draw
- 4.1W
- 28W
- 103W
- 585W
- Amplifier ClassD
- Control and StatusRS-232 and Ethernet
- Dante Network Audio Input ConnectorsTwo (2) RJ-45 (switched or redundant)
- Output ConnectorsEight (8) 5mm Euroblock
- LED IndicatorsPower, fault, signal (x8)
- Power Supply Input100-240 VAC 50/60Hz (PFC Universal Input)
- ConstructionAluminum chassis
- Mounting19” Rack-mountable, rack ears supplied
- CoolingConvection (No fans)
- Dimensions1.74x17.3x14.5 inches (44x440x369 mm)
- Weight13 lbs. (5.9kg)
