TASCAM MM-2D-X 2-Channel Mic/Line I/O Dante Converter with DSP Mixer

The MM-2D-X is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input/output.

TASCAM MM-2D-X Features

• 2-channel mic/line input with phantom power (+48v) support
• Supports remote mic gain control
• 2 line output
• 4 Dante input/output
• Supports PoE (Power over Ethernet)
• Up to 24bit/96kHz
• Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 6 in/4 out matrix mixer)
• Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
• Compatible with Dante Domain Manager and Dante AES67 Mode
• Flexible scene preset function allows to work in different area situations (Up to 50 presets)
• Timer event function allows to automatically switch scenes at a specified time (planned to be compatible on a future version update)
• 2 types of user control software available for Windows/Mac/iOS/Android devices:
• For integrators: input/output routing selection, DSP/design/scene settings of the complete system, etc.
• For end-users: simple app design for only the necessary functions such as area volume settings, etc.
• Remote control via Dante
• Half-rack mountable size
• Equipped with indicators that show LAN/Dante connection status and sample rate
• Equipped with signal indicators that monitor line input/output signals
• Configurable reference level (via remote control only)

• MM-2D-X 2-Channel Mic/Line I/O Dante Converter with DSP Mixer1
• Surface rack mountable angles2
• Owner's manual (including warranty)

• Formats and channels44.1/48/88.2/96kHz,16/24-bit, 2 channels
• Input/output ratings
  • DATA/DATA+PoE connectors
    • Connector: RJ-45
    • Transmission protocol: Dante
    • Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
    • Cables: category 5e or faster STP cables
  • ANALOG IN connectors
    • Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
    • Minimun input level: -74 dBu
    • Maximum input level: +26 dBu
    • Input impedance: 2.0 kΩ or higher
  • ANALOG OUT connectors
    • Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
    • Nominal output levels
      • +4 dBu: (when Ref. Level not -9 dBFS)
      • +6 dBu: (when Ref. Level set to -9 dBFS)
    • Maximum output level (switchable)
      • +15 dBu (Ref. Level: -9 dBFS)
      • +18 dBu (Ref. Level: -14 dBFS)
      • +20 dBu (Ref. Level: -16 dBFS)
      • +22 dBu (Ref. Level: -18 dBFS)
      • +24 dBu (Ref. Level: -20 dBFS)
    • Output impedance: 200Ω or lower
• Power
  • PoE class: 0
  • TASCAM PS-P1220E AC adapter (sold separately)
• Power consumption6W
• Dimensions (WxHxD, including protrusions)214x44.45x136.1mm
• Weight878 g
• Operating temperature range0°C-40°C
• Audio performance
  • MIC IN → DANTE OUT
    • Mic amp EIN (equivalent input noise): -125 dBu (150Ω, 22kHz LPF+A, JEITA)
    • Frequency response
      • +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA)
      • +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA)
    • Distortion (THD+N): 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA)
    • S/N ratio: 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    • Crosstalk: 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    • Dynamic range: 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
  • DANTE IN → LINE OUT
    • Frequency response
      • +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA)
      • +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA)
    • Distortion (THD+N): 0.005 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA)
    • S/N ratio: 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    • Crosstalk: 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    • Dynamic range: 105 dB (44.1/48/88.2/96kHz sampling frequency, JEITA)
    • Note: JEITA indicates compliance with JEITA CP-2150