DiGiGrid IOX is the perfect high-count I/O interface for your studio's performance/recording room. This advanced audio interface features 12 mic/line inputs with broadcast/studio-quality preamps and 6 line outputs. The IOX delivers high-resolution monitoring in the studio and the control room alike, with four headphone outputs allowing independent mixes for each musician. With your IOX and a dedicated SoundGrid DSP server, you can run up to hundreds of SoundGrid-compatible Waves and third-party plugins, all fully integrated within your DAW of choice.
Use a single Ethernet cable to plug the IOX into your SoundGrid network, and you will instantly tap into a world of real-time tracking, mixing and monitoring, with incredibly low latency of only 0.8 milliseconds.
Waves IOX Features
- 12 mic/line inputs with broadcast/studio-quality preamps
- ASIO- and Core Audio-compliant audio I/O
- 6 line outputs, 4 headphone outputs
- Connects via a single Ethernet cable (Cat 5e/Cat 6)
- Quick-view front panel metering
- High-definition 192 kHz ADC conversion
- IOX Audio Interface1
- General
- 1U rack-mounted (standard 19” rack-mount wide, 4U high, 380-mm deep excluding connectors)
- Supported sample rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be supported in the future)
- 12 channel mic/line inputs (on XLR/TRS combo)6 channel line outputs
- Word Clock I/O2 SoundGrid ports (RJ45s)
- Reset switch4 headphone outputs with analog level knobs; range: Off to +15 dB
- Clock: Word Clock input, SoundGrid (SoE), Internal1 AC input
- Multiple broadcast level format settings (jumpers on all analog I/Os)
- Inputs
- Input Impedance
- Mic: 2K5 / Line: 8K0 Ohms
- Gain Range:
- Mic: 0 dB to +52.5 dB in 7.5-dB steps / Line: -10 dB to +42.5 dB in 7.5-dB steps
- Fine control provides an additional 0dB to 7dB in 0.5-dB steps
- Maximum Input Level:
- Mic: +26 dBu / Line: +36 dBu
- Mic Equivalent Input Noise: > -126 dB (150 Ohm source, gain +59.5 dB)
- Harmonic Distortion: Typically < 0.01% @ unity gain, -10dB input @ 1 kHz
- Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
- Channel Separation: Better than 90 dB (40 Hz to 15 kHz)
- Input Impedance
- Outputs
- Maximum Output Level: +22 dBu
- Residual Output Noise: <90 dB (20 Hz to 20 kHz)
- Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
- Output Impedance: 50 Ohms
- Channel Separation: Better than 90 dB (40 Hz to 15 kHz)
- Harmonic Distortion: Typically < 0.01% @ unity gain, -10dB input @ 1 kHz
- Dimensions
- Width: 48.26 cm / 19 inches
- Height: 4.36 cm / 1U
- Depth: 35.6 cm / 14.01 inches
- Device Weight: 4.5 kg / 9.92 lbs
