Yamaha HS8S Powered Subwoofer

Add power and depth to your audio accuracy with the HS Series’ companion subwoofer, the HS8S.

This powered sub from Yamaha boasts enhanced controls to personalize your audio for mixes, recordings, music production, and more:

• Its HIGH CUT control sets the cutoff frequency of the HS8S sub’s output high-frequency attenuation from 80Hz to 120Hz
• The PHASE switch adjusts the output phase
• Its LOW CUT switch and controls enable attenuation of low frequencies for output between 80Hz and 120Hz

Additionally, the HS8S features built-in XLR and TRS phone jack inputs and XLR for L and R and EXT SUB out so you can enjoy better flexibility in connection and setup.

Yamaha HS8S Features

• 8" bass-reflex powered subwoofer delivers low frequencies down to 22Hz
• Personalize your audio for mixes, recordings, music production, and more
• 22Hz - 150Hz frequency response
• High-power 150W amplifier exclusively designed for low frequencies
• LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
• PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
• XLR and TRS phone for outputs and XLR for L and R and EXT SUB

• HS8S Powered Subwoofer1

• Speaker TypePowered subwoofer
• Frequency range (-10dB)22Hz - 160Hz
• Components (LF)8" cone
• Output power150W
• I/O connectorINPUT: XLR3-31 type (balanced) x2, PHONE (balanced) x2 / OUTPUT: XLR3-32 type (balanced) x2 (L&R), XLR3-32 type (balanced) x1 (EXT SUB)
• Power Consumption70W
• ShapeBass-reflex type
• Cabinet materialMDF
• Dimensions (WxHxD)11.8x13.8x15.3" (300x350x389mm)
• Net weight27.6 lbs (12.5g)
• OthersLEVEL control, PHASE switch : NORM./REV., HIGH CUT control (80-120Hz, center click), LOW CUT control (80-120Hz, center click), LOW CUT switch (ON/OFF)

More about Yamaha's HS Series Studio Monitors

Experience exceptional accuracy with Yamaha’s HS Series of speakers. These are the perfect studio reference monitors for any audio application that requires precision and accuracy, such as mixing, music production, and recording—all from speaker monitors that deliver a concise sound image, high resolution, and flat response in close quarters.

Enjoy an amazingly smooth response over a wide range of bandwidth with HS Series’ innovative transducer design. An advanced magnetic field helps provide seamless, natural transitions. Every component in the transducer has been optimized for signal accuracy throughout the audio spectrum:

• An efficient 1” dome tweeter extends the usable frequency range for high-resolution audio
• A thick wave guide minimizes vibration to deliver high end up to 30kHz without suffering distortion
• High-power, ultra-responsive woofers provide a well-defined bottom end at any output level
• The woofer ring and the basket further enhance the bass while providing clear, accurate mids

HS Series speakers deliver consistent, high-resolution sound with exceptionally flat response across the sound spectrum. Their bi-amp design is perfectly matched to the transducers, with a separate amp for the woofer and tweeter each.

Inside and out, this series of monitor speakers is built to enhance your sound. Their cabinets eliminate unwanted resonance. Constructed of dense and resilient MDF, the enclosures also feature a three-way mitered-joint technique that anchors the corners to improve durability and eliminate unwanted resonance.

Ready to meet the demands of professional audio production applications, the HS Series also includes a speaker port design that reduces audible noise up to 6dB for better sonic clarity. In addition, full-range models feature two response controls that allow you to adapt the speakers’ settings to the specific acoustics of your space’s shape and size.