The MG10X CV from Yamaha is a 10-channel analog mixer with effects.
Yamaha MG10X Features
- Max. 4 Mic / 10 Line Inputs (4 mono + 3 stereo)
- 1 Stereo Bus
- 1 AUX (incl. FX)
- “D-PRE” mic preamps with an inverted Darlington circuit
- 1-Knob compressors
- High-grade effects: SPX with 24 programs
- PAD switch on mono inputs
- +48V phantom power
- XLR balanced outputs
- Metal chassis
- MG10X CV 10-Channel Analog Mixer with Effects1
- AC Adapter1
- Owner’s Manual1
- MIXING CAPABILITY On-board processors: SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)
- I/O Phantom power: +48V
- INPUT CHANNELS
- Mono[MIC/LINE]: 4
- Stereo[LINE]: 3
- OUTPUT CHANNELS
- STEREO OUT: 2
- MONITOR OUT: 1
- PHONES: 1
- AUX SEND: 1
- BUS Stereo: 1, AUX[FX]: 1
- INPUT CHANNEL FUNCTION
- PAD: 26 dB (Mono)
- HPF: 80 Hz, 12 dB/oct (Mono)
- COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
- EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
- EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
- EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
- PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
- Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]
- TOTAL HARMONIC DISTORTION 0.02 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.003 % @ +24dBu (1kHz), GAIN knob: Min
- FREQUENCY RESPONSE +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min
- HUM & NOISE LEVEL
- Equivalent input noise: -128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
- Residual output noise: -102 dBu (STEREO OUT, STEREO LEVEL knob: Min)
- CROSSTALK
- -83 dB
- POWER REQUIREMENTS
- PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha
- POWER CONSUMPTION
- 22.9 W
- DIMENSIONS (WxHxD): 9.6x2.8x11.6” (244x71x294mm)
- NET WEIGHT 2.1 kg (4.63 lbs.)
- Operating Temperature0 to +40˚C
