The XMV4140-D from Yamaha is a 4-channel Dante power amplifier that boasts Class-D efficiency ideal for commercial installation sound systems. It comes with Dante to better equip the amp to work in larger venues where long-distance cabling is required.
Yamaha XMV4140-D Features
- 4-channel Dante power amplifier with Class-D efficiency
- Ideal for commercial installation sound systems, particularly in larger venues
- Can operate simultaneously in high or low impedance mode so you don't need additional equipment
- Double Power Mode doubles output power of selected channels
- Supports Dante Domain Manager, AES67, and Dante Device Lock
- Works well with MTX Series processors
- Protective functions for long product life and reliable operation
- External control via Ethernet
- Source Select function
- Backup Mode and Override Mode for redundancy and protection
- XMV4140-D 4-Channel Dante Power Amplifier1
- Output Power
- 1kHz (THD+N=1%: 4Ω): 140W x 4
- 1kHz (THD+N=1%: 8Ω):140W x 4
- 1kHz (THD+N=1%: 4Ω/Double Power Mode):280W x 2
- 1kHz (THD+N=1%: 8Ω/Double Power Mode): 280W x 2
- High impedance (100V line):125W x 4/80Ω
- High impedance (70V line):125W x 4/40Ω
- Voltage Gain
- RL=8Ω: 28.7dB
- RL=8Ω/Double Power Mode: 31.2dB
- 100V: 38.2dB
- 70V:35.2dB
- Power Consumption1/8 power (4 Ω pink noise):150W, Idle (4 Ω):37W, Standby:18.5W
- Total Harmonic Distortion≤ 0.2% (1kHz, half power)
- Frequency Response0dB, ±1.0dB (RL=8Ω, 100V/70V, Po=1W, 20Hz - 20kHz)
- S/N Ratio≥100dB(A-weighted)
- Crosstalk≤-60dB
- Input Sensitivity+4dBu
- Input Impedance20kΩ (balanced), 10kΩ (unbalanced)
- I/O Connectors
- Analog I/O: Input: Euroblock x 2 (6P, balanced)
- Digital I/O: RJ45 x 2 (Dante PRIMARY / SECONDARY)
- Speaker Output: Barrier strip x 4 pairs
- Control Ports: Remote, Fault Output : Euroblock (3P) x 1
- Network: Shared with Dante ports
- Others: AC Inlet x 1
- Input Level+24dBu (Maximum)
- Protection Circuit
- Load Protection: POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
- Amplifier Protection:
- Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute (Restored automatically), Low load impedance: Output mute (Restored automatically)
- Power Supply Protection:
- Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain reduction (Restored automatically)
- Cooling3-Speed fan x 2, front-to-back airflow
- Power Requirements100V, 120V, 230V-240V; 50Hz/60Hz
- Dimensions (WxHxD)18.9x3.5x16.6" (480x88x422 mm)
- Net Weight17.9 lbs (8.1 kg)
More about Yamaha's XMV Power Amplifiers
Specifically designed to complement sound systems in commercial installations, the XMV Series from Yamaha is a family of 8 multi-channel amplifier models that boast a variety of output power capabilities, flexible inputs and outputs, and support for both high- and low-impedance connectivity.
An innovative circuit characteristic of XMV amplifiers improves the already highly efficient Class D circuit topology, bringing the efficiency level of the amp's output stage up to over 90%. This is achieved by automatically switching the circuit to match the corresponding output voltage.
XMV power amps can operate in both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes simultaneously, eliminating the need for additional equipment, as well as streamlining the installation process.
XMV also enables both 70V and 100V operation for every pair of channels by simply selecting the preferred mode using the dip switches on the rear panel. High impedance operation often requires the use of two combined channels in bridge mode, but with XMV, 70V or 100V mode can be assigned to every pair of channels without affecting the number of available output channels. By automatically switching to a lower voltage drive, efficiency is improved significantly without sacrificing crucial aspects of the amp's performance such as keeping the distortion levels to a minimum.
