ETC Desire D40XTI Vivid LED Par Wash Light

The ETC Desire D40XTI Vivid LED Par Wash Light offers the best all-around use as a color-changing wash fixture.

The ETC Selador Desire D40XTI™ LED luminaire gives you the most flexible color mixing for your building. Featuring the x7 Color System™ - which combines up to seven colors at the source for the broadest color range available from an LED - the D40XTI is a rugged, durable fixture ETL 1598-rated for permanent indoor use and IP66-rated for long-term outdoor use.

Smooth dimming, all the way down to zero. The D40XTI features Selador Desire®-quality dimming capabilities, transitioning its intensity like a conventional fixture, without noticeable steps.

ETC Desire D40XTI Vivid Features

• Available in black, white, or silver finishes
• Noiseless, fan-free convection cooling for acoustically sensitive installations
• Waterproof outdoor-rated power lead rugged, durable fixture ETL 1598-rated for permanent indoor use and IP66-rated for long-term outdoor use

• Desire D40XTI Vivid LED Par Wash Light1
• Hanging yoke1
• Termination board1
• Accessory ring (for installation of secondary lenses)1

• Source
  • LED details: 40 Lumileds LUXEON® Rebel LED
  • Max lumens: 2252
  • Lumens per watt: 23.6
  • L70 rating (hours to 70% output): 50,000 hours
• Color
  • Colors used: Red, Red-Orange, Amber, Green, Cyan, Blue, Indigo
  • Color temperature range: 2,700–6,500K
  • Calibrated array: Yes
  • Red shift: Yes (not available on static-white)
• Optical
  • Beam angle: 8°–17°
  • Aperture size: 7.5"
  • Pattern projection: No
  • Pattern size: N/A
  • Camera flicker control/Hz range: 900–25,000 Hz
  • Notes: Secondary lenses available for multiple beam-spread options
• Control
  • Input method: DMX512 via termination board
  • Protocols: DMX-512/RDM
  • RDM configuration: Yes
  • UI type: None (configure via RDM)
  • Local control: No
  • Onboard presets: Yes
  • Onboard sequences: Yes
  • Onboard effects: No
  • Fixture-to-fixture control: No
  • Notes: 15-bit virtual dimming engine
• Electrical
  • Voltage range: 100–240 VAC 50/60 Hz
  • Input method: Waterproof, 72 in power lead; Requires power from non-dimmable source
  • Inrush: 15A at 120V (first half-cycle); 40A at 240V (first half-cycle)
  • Fixtures per circuit: 10 (15 A may be fed on same circuit); (*All measurements are for 120 V, 60 Hz. Results may vary in different regions)
  • Wattage typical: 110
  • Current draw: 1/0.5A
• Thermal
  • Ambient operating temp: -20°–40°C (-4°–104°F)
  • Fan (controllable): No
  • Droop compensation: Yes
  • dB range: N/A
  • BTUs/hour: 375.32
• Physical
  • Materials: Die-cast, all metal housing
  • Color options: Black, white, silver, or custom color
  • Mounting options: Single-pole mount, wall or square pole mount, twin fixture pole mount
  • IP rating: IP66 for exterior, wet location use
  • Weight: 6.8 kg (15 lbs)
  • Notes: Cable diameter: Power 0.36 in / Data 0.34 in; Effective projected area (EPA): 0.74
• Warranty
  • Fixture: 5 yrs
  • LED array: 10 yrs
• Regulatory & Compliance
  • Approved regulatory standards: cETLus Listed, Conforms to UL1598, Certified to CSA C22.2 No. 250.0, CE Compliant
• Dimensions (LxWxH)10.25x10.72x13.25" (260x272x337mm)