The BP2 is actually 2 BP1s in the same enclosure. The A and B circuits operate independently of one another and may be used simultaneously. Only the headset amplifier is shared so that both circuits can be monitored on a single-muff headset. Each circuit has its own volume control, signal button, signal lamp, mic on/off switch and sidetone control. The 2 circuits are connected to the rear panel XLRs so a Y-cable or SB1 Splitter Box is necessary for each circuit if you wish to loop through to the next station in that circuit.
Pro Intercom BP2 Features
- 2-Circuit Intercom Beltpack
- A and B circuits operate independently of one another and may be used simultaneously
- Each circuit has its own volume control, signal button, signal lamp, mic on/off switch and sidetone control
- Pro Intercom BP2 2-Circuit Intercom Beltpack1
- Power requirement24 ~ 30VDC, 10 mA quiescent, 30mA max. (with signal lamp lit)
- Headphone output8 ~ 4KW acceptable, 200W ideal
- Microphone input200 ~ 600W Dynamic
- Sidetone rejection>50dB
- Audio bridging impedance200W unbalanced
- Size3.7x4.3x2.5" (93.98x109.22x63.5mm)
- Weight13.5 oz. (0.383 Kg.)
