• APB DynaSonics ProRack-House 16-Channel Analog Mixer
1 1

APB DynaSonics ProRack-House 16-Channel Analog Mixer

APB DynaSonics ProRack-House 16-Channel Analog Mixer

SoundPro Item: 18462 | Part Number: PRORACK-HOUSE

$6,250.00
$6,250.00 $6,250.00
Your Price Sold out
MSRP: $6,250.00 | MAP: $6,250.00

Usually ships in 5-7 business days

  • 12 Mono input channels and 4 Dual-Mono/Stereo input channels, all with Spectra-quality microphone preamplifiers in a 10u (17.5” x 19”) package
  • Minimum phase shift circuitry and internal Mother Board/Daughter Board construction derived from the Spectra console design
  • 48 volt Phantom Power switch, Mic/Line switch, Mic Pad switch, and Polarity Reverse switch
  • Variable frequency high-pass filters on all Mono and Stereo input channels with a 20Hz to 400Hz sweep range at 12dB per octave
  • Mono input channels feature fixed high and low frequency EQ bands and two mid-sweep EQ bands, with EQ On switch and LED
  • Stereo channels feature fixed high and low frequency EQ bands and a single mid-sweep EQ based on Spectra circuitry
  • Six aux sends; each pair of sends switchable between a pre or post fader source
  • All channels can assign to Left-Right, Center and Mono mix bus assignment along with additional assignment switches to subgroups 1-2 and 3-4
  • Left-Right, Center and Mono mix output level can be switched from line level to mic level
  • Internally illuminated Mute and PFL/AFL switches along with 6-segment LED channel metering and 100mm faders on all input channels
  • Four LED bar graphs can meter the Left, Right, Center and Mono outputs or the Group 1-4 outputs
  • Bus level signal monitoring using bi-color LED’s on all 14 mix buses: Left, Right, Center, Mono, Groups 1-4, and Aux 1-6
  • 100-240 VAC, 50/60Hz Power Supply – Field replaceable (plug in) without disassembly of mixer
  • Adjustable connector assembly rotates and can be locked into any of three different angles relative to the front panel
Log in or register for YOUR best price

APB-DynaSonics’ ProRack™ small-format mixers incorporate a wealth of professional features and exceptional performance into 10 rack spaces. The chassis design features an adjustable connector assembly that freely rotates and can be set to three different angles relative to the front panel. This allows the input and output jacks to be properly positioned whether the mixers are mounted in a vertical rack, slant rack or used on a desk top. All channels can assign to Left-Right, Center and Mono mix bus assignment along with additional assignment switches to subgroups 1-2 and 3-4. These outputs (including aux outputs) each have balanced XLR outputs, TRS bus inputs and TRS insert connectors.

ProRack’s™ audio design includes the use of minimum phase-shift circuitry, expressive EQ and integrated mic preamplifiers, both used in a proprietary front end circuit. In addition to superior audio quality, reliability and serviceability are also primary design criteria.

View full details

Specifications

Electrical
THD+Noise (mic Input to Main output)
<0.01% @ +15dBu output
Audio
Frequency Response (any Input to Any output)
+0/-0.5dB 20Hz to 20kHz (ref to 1kHz)
Connectivity
Phase Response (mic Input to Main output)
+10/-15 degrees 20Hz to 20kHz (ref 1kHz)
Main Bus (L-R-C-M) Output Noise
-85dBu (all channels assigned w/ faders down, master faders at unity)
Group Bus (1-4) Output Noise
-85dBu (all channels assigned w/ faders down, group master fader at unity)
Aux Bus (1-6) Output Noise
-90dBu (aux sends down, aux master at unity)
Channel XLR Input
>3KΩ balanced (with or without Pad)
Channel Line Input (via TRS)
>20KΩ balanced
Channel Line Input (via XLR w/ Pad)
>4KΩ balanced
Bus XLR Outputs (main, Group, aux)
100Ω symmetrically-balanced (to feed 600Ω or greater)
Monitor TRS Outputs
100Ω impedance-balanced
XLR Balanced Outs
+4dBu (Symmetrically-Balanced, Pin 2= “Hot”) Max Out= +26dBu
Construction
Channel and Bus Insert Sends/Returns
100Ω unbalanced / 5KΩ unbalanced (to feed 2KΩ or greater)
Channel Insert
+4dBu (Tip= Send, Ring= Return, Sleeve= Audio Gnd) Max Out= +22dBu
Bus Insert
-2dBu (Tip= Send, Ring= Return, Sleeve= Audio Gnd) Max Out= +22dBu
General
Mic EIN
-128dBu @ 60dB gain, 150Ω source
Channel Mute
>100dB
Channel Fader Attenuation
>100dB
Channel Routing
>80dB
Channel Pan Isolation
>80dB
Channel to Channel Isolation
>90dB
Aux Send Attenuation
>90dB
Aux Pan Isolation
>70dB
Channel TRS Direct Out
100Ω impedance-balanced
Channel Direct Out
+4dBu (TRS Impedance Balanced, Tip= “Hot”) Max Out= +22dBu
TRS Balanced Outs
+4dBu (Impedance-Balanced, Tip= “Hot”) Max Out= +22dBu

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2