• Audio-Technica ATW-T210CI 2000 Series Wireless Bodypack Transmitter
1 1

Audio-Technica ATW-T210CI 2000 Series Wireless Bodypack Transmitter

Audio-Technica ATW-T210CI 2000 Series Wireless Bodypack Transmitter

SoundPro Item: 141884 | Part Number: ATW-T210CI

$189.00
$189.00 $189.00
Your Price Sold out
MSRP: $189.00 | MAP: $189.00

Usually ships in 5-7 business days

  • Bodypack transmitter
  • For use with 2000 Series wireless systems
Log in or register for YOUR best price

The ATW-T210CI is a wireless bodypack transmitter for use with Audio-Technica's 2000 Series wireless systems.

View full details
  • System
    • Operating Frequencies Band I : 487.125 to 506.500 MHz
    • Modulation Mode FM
    • Maximum Deviation ±40 kHz
    • Frequency Response 100 Hz to 15 kHz (+1 dB, -3 dB)
    • Operating Range 100 m (300'), typical Open range environment with no interfering signals.
    • Total Harmonic Distortion <1% (at 1 kHz, ±20 kHz deviation)
    • Operating Temperature Range
      • 5ºC to 45ºC
      • 41ºF to 113ºF
      • Battery and LCD performance may be reduced at very low temperatures.
      • Number Of Channels 10 total
      • Notes
        • Fourth-generation 2000 Series (“c” version) components:
          • ATW-R2100c receiver
          • ATW-T210c body-pack transmitter
          • ATW-T220c cardioid dynamic microphone/transmitter
        • Third-generation 2000 Series (“b” version) components:
          • ATW-R2100b receiver
          • ATW-T210b body-pack transmitter
          • ATW-T220b cardioid dynamic microphone/transmitter
        • Second-generation 2000 Series (“a” version) components:
          • ATW-R2100a receiver
          • ATW-T210a body-pack transmitter
          • ATW-T220a cardioid dynamic microphone/transmitter
        • First-generation 2000 Series (original) components:
          • ATW-R2100 receiver
          • ATW-T210 body-pack transmitter
          • ATW-T220 cardioid dynamic microphone/transmitter
        • CONSUMER ALERT: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.
  • Handheld Transmitter
    • RF Power Output
      • High: 30 mW
      • Low: 10 mW (switchable), at 50 ohms
    • Spurious Emissions: Following federal and national regulations
    • Microphone Element: Dynamic cardioid
    • Battery Type
      • Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
      • Recharging power for NiMH batteries (with ATW-CHG2)
      • U.S./Canada/Latin America: 3.2 V DC, 230 mA x2
      • Other world areas: 3.2 V DC, 320 mA x2
    • Battery Life
      • High: 7 hours (alkaline)
      • Low: 9 hours (alkaline)
      • Depending on battery type and use pattern.
    • Dimensions: 232 mm (9.13") long, 48 mm (1.89") diameter
    • Net Weight: 252 g (8.9 oz), without batteries
  • Beltpack
    • RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
    • Battery Life
      • High: 7 hours (alkaline)
      • Low: 9 hours (alkaline)
      • Depending on battery type and use pattern.
    • Battery Type
      • Two 1.5V AA alkaline (not included) or two 1.2V AA NiMH (not included)
      • Recharging power for NiMH batteries (with ATW-CHG2)U.S./Canada/Latin America: 3.2 V DC, 230 mA x2Other world areas: 3.2 V DC, 320 mA x2
    • Dimensions: 66 mm (2.60") W x 22.5 mm (0.89") D x 92.3 mm (3.63") H
    • Input Connections
      • Four-pin Locking Connector
      • Pin 1: GND
      • Pin 2: INST INPUT
      • Pin 3: MIC INPUT
      • Pin 4: DC BIAS +9V
    • Net Weight: 81 g (2.9 oz), without batteries
    • Spurious Emissions: Following federal and national regulations
  • Receiver
    • Receiving System: True diversity
    • Image Rejection: 60 dB nominal, 55 dB minimum
    • RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
    • Maximum Output Level: XLR, balanced: +9 dBV, ¼" (6.3 mm), unbalanced: +4 dBV
    • Antenna Input
      • BNC-type, 50 ohms
      • Bias voltage 12V DC, 60 mA, each
    • Power Requirements: 12-18V DC, 500 mA
    • Dimensions: 210 mm (8.27") W x 162.2 mm (6.39") D x 44 mm (1.73") H,br>Not including BNC connectors or feet.
    • Weight: 1 kg (35.3 oz), without accessories
    • Audio Output Attenuator (ATTN): Balanced Audio Output Attenuator: Two position switch: 0 / -12 dB

Why Choose SoundPro?

Since 1973, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

Start Shopping

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 2