Skip to product information
1 of 8

Audix NC4BX10 Novacore Quad-Channel Novacore Digital Wireless Lav System

Audix NC4BX10 Novacore Quad-Channel Novacore Digital Wireless Lav System

SoundPro Item: 207120 | Part Number: NC4BX10

Regular price $3,926.00
Regular price $4,712.00 Sale price $3,926.00
Your Price Sold out
MSRP: $4,712.00 | MAP: $3,926.00

Usually ships in 5-7 business days

  • Complete Quad-Channel System Ships Ready To Deploy Out Of The Box
  • AES-256 Encryption Secures All RF Transmission Across Every Channel
  • One-Touch IR Sync Eliminates Manual RF Pairing Between Transmitter And Receiver
  • Dedicated Remote Mute Input Supports External Latching Or Momentary Switch Control
  • Dante/AES67 Networking On The Receiver Enables Direct IP Audio Integration
  • TA3F Connector Compatibility Allows Mic Swaps As Application Needs Change
  • Fully Expandable Within The Novacore Ecosystem For Growing Channel Requirements

The Audix NC4BX10 is a purpose-built quad-channel digital wireless lavalier system designed for houses of worship, broadcast talent, theatrical productions, and installed-sound environments where four simultaneous wireless channels must perform reliably without setup complexity. The bundle ships complete: the NCR4 quad-channel digital receiver, four NCBP UHF digital bodypack transmitters, and four ADX10 miniature cardioid lavalier condenser microphones. Nothing additional is required to go operational.

At the core of the system is the Novacore digital RF platform, which delivers AES-256 encryption, under 3 ms latency, and a 48 MHz tuning range across the UHF band. The NCR4 receiver outputs balanced XLR audio on each channel and adds Dante/AES67 networking via RJ45 for direct integration into IP audio infrastructure. On the transmitter side, the NCBP offers variable input gain in 6 dB steps, a built-in USB-C charging port, and a dedicated 3.5 mm remote mute input for external switch control. One-touch IR sync between transmitter and receiver eliminates manual RF configuration. The ADX10 lavalier provides cardioid pickup with strong off-axis rejection, keeping feedback controlled in reverberant spaces and on crowded stages.

The NC4BX10 is also a forward-compatible investment. The NCBP transmitter accepts any TA3F-terminated microphone, including Audix headset and lavalier models as well as third-party options, and the entire system scales within the Novacore ecosystem by adding transmitters, receivers, or charging infrastructure as production demands increase.

Downloads

View full details

Specifications

Receiver (NCR4)
Channels
4
RF Frequency Range
494-542 MHz (country dependent)
RF Bandwidth
48 MHz
Encryption
AES-256
Frequency Response
20 Hz-20 kHz (< -2 dB)
Latency
< 3 ms
Audio Processing
44.1 kHz / 24-bit
Dynamic Range
> 110 dBA
Receiving Mode
Digital Diversity
Spurious Rejection
> 80 dB
Antenna Type
1/4-wave
Antenna Connector
Detachable BNC Female, 50 Ohm
Sensitivity
–85 dBm
Audio Output Level Switch
-6 dB, 0 dB, +16 dB
Ground Lift Switch
Yes
Audio Output Connector
XLR Balanced (Pin 1 Ground, Pin 2 +, Pin 3 -)
Output Impedance
600 Ohm
Output Level
+18 dBV
Networking
Dante/AES67 via RJ45; RJ11 x2 for PC software control
Recommended Network Distance
< 100 meters
Power Requirements
12 VDC @ 2A (tip positive, external supply included)
Chassis
1U, 19"
Materials/Finish
Steel / Black
Weight
Approx. 2.3 kg / 5 lbs (without antennas)
Dimensions
419 x 44 x 216 mm (W x H x D)
Bodypack Transmitter (NCBP)
Type
Digital Bodypack Transmitter
Audio Resolution
24-bit
Latency
< 3 ms
Encryption
AES-256
Battery Options
2x AA alkaline or 1x NCLB rechargeable lithium-ion
Battery Life
8+ hours
USB Charging
USB-C (built-in); compatible with Novacore charging station
Mic Connector
TA3F (Pin 2 hot)
Variable Gain
-12 dB to +18 dB in 6 dB steps
Audio Controls
Low cut, limiter, phase invert
Remote Mute Input
3.5 mm (hardwire mute)
Construction
ABS housing
Pairing
IR sync
Lavalier Microphone (ADX10)
Transducer Type
Pre-polarized condenser
Polar Pattern
Cardioid
Frequency Response
50 Hz - 18 kHz
Output Impedance
800 Ohm
Sensitivity
5 mV/Pa @ 1 kHz
Equivalent Noise Level
< 29 dB (A-weighted)
Signal to Noise Ratio
> 65 dB
Maximum SPL
>= 120 dB
Power Requirements
9-52 V phantom
Connector
Shielded 3 ft cable terminating to miniature 3-pin female XLR
Materials/Finish
Machined Brass / Black
Weight
21 g / 0.74 oz
Length
25 mm / 0.98"
Included Items
Receiver
1x NCR4 Novacore Quad-Channel Digital Receiver
Transmitters
4x NCBP Novacore UHF Digital Bodypack Transmitter
Microphones
4x ADX10 Cardioid Lavalier Condenser Microphone
Antennas
2x BNC Detachable Antennas
Power Supply
1x PS12V 12 VDC External Power Supply (100-240 VAC / 50/60 Hz)
Belt Clips
4x NCBC Belt Clip
Charging Cables
4x NCCC 20" Charging Cable, USB-A to USB-C

Why Choose SoundPro?

Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

  • Certified Account Managers

    Our Account Managers, with 16+ industry certifications, are ready to find your solution.

  • Personalized Pricing

    We know every project is unique. Get a personalized quote anytime you need it

  • Fast Shipping & Local Pickup

    In stock items ship same day if ordered by 4pm CST. Pickup offered in Irving, TX.

  • Accountability from Real People

    We aim for a smooth, transparent experience by setting and sticking to clear expectations.

  • Easy Payments & Financing

    We accept all major credit cards and also offer financing through our partners.

1 of 2