
Specifications
Transmitter (NCBP)
RF Frequency Range
494-542 MHz (UHF, country dependent)
RF Bandwidth
48 MHz
Encryption
AES 256-bit
Modulation Type
Audix Proprietary Digital
Occupied Bandwidth
< 200 kHz
RF Output Power
1 mW / 10 mW switchable
Antenna Type
1/4-wave whip, fixed
Latency
< 3 ms
Audio Control
Variable gain: -12 dB to +18 dB in 6 dB steps; low cut; limiter; phase invert
Mic Input Connector
3-Pin male mini connector (TA3M)
Mic Input Configuration
Unbalanced
Mic Input Impedance
1 MOhm
Maximum Input Level
1725 mVrms (@ 1% THD)
Compatible Mic Connectors
TA3F (Pin 2 Hot)
Remote Mute Input
3.5 mm TRS
Display
LCD: GRP-CH, battery status, RF signal strength, settings menu
Controls
Sync sensor, ON, MUTE, MODE, SET buttons
Power Requirements
1x NCLB Li-ion (1500 mAh) or 2x AA alkaline
Battery Runtime
9+ hours
Battery Charging
Audix NCC1 or NCC2 charging station, or USB-C
Materials
ABS Plastic / Aluminum / Black Finish
Transmitter Dimensions and Weight
Dimensions (W x H x D)
66 x 80 x 25 mm
Weight (no battery)
0.21 lbs
Microphone (ADX10)
Transducer Type
Pre-Polarized Condenser
Polar Pattern
Cardioid
Frequency Response
50 Hz - 18 kHz
Output Impedance
800 ohms
Sensitivity
5 mV/Pa @ 1k
Equivalent Noise Level
< 29 dB (A-weighted)
Signal to Noise Ratio
> 65 dB
Maximum SPL
>= 120 dB
Power Requirements
9-52 V phantom
Connector
Shielded 3 ft cable terminating to miniature 3-pin female XLR
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials
Machined Brass / Black Finish
Weight
21 g / 0.74 oz
Length
25 mm / 0.98 in
Included Items
Transmitter
NCBP Novacore UHF Digital Bodypack Transmitter
Microphone
ADX10 Cardioid Lavalier Condenser Microphone
Belt Clip
NCBC
Charging Cable
NCCC 20 in USB-A to USB-C
Why Choose SoundPro?
Since 1972, SoundPro has been the trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.